TP-Link TD-8840

ADSL2+ Modem Router

Description:

TD-8840 uses integrated ADSL2+ transceiver and a 256-MHz MIPS32 CPU.The AFE supports full-rate ADSL connectivity conforming to the ITU and ANSI specifications; MIPS32 CPU with MMU and 16-KB I-cache/8-KB D-cache is integrated into the device. In addition to the basic DMT physical layer functions, the ADSL PHY supports dual latency ADSL Framing (fast and interleaved) and the I.432 ATM Physical Layer.TD-8840 is a complete plug-and-play solution. With standard Ethernet interface, it can be directly connected to any 10M/100M Ethernet devices,supporting Auto MDI/MDIX.

The TD-8840 uses ADSL (Asymmetric Digital Subscriber Line) technology for Internet connection speeds of up to 455x faster than dial-up, while using a standard phone line. With a built-in 4-port switch, up to four network-ready computers or devices can simultaneously be connected to the TD-8840 for access to the Internet.

The device comes with a CD with an Easy Setup Assistant that helps you step by step to complete your Internet connection, wireless network settings and security configurations. This feature allows even novice users to setup the router products without sacrificing any key features, just play the AUTO-RUN CD bundled to have your network set up quickly & hassle-free.
TD-8840 not only use html (web mode through Ethernet port) to configure the MODEM but also use external utility software, too. With TP-LINK’s excellent design of circuit and high quality production, we guarantee ADSL MODEM a high performance, very good stability and easy to use.

Features:

  • Up to 24Mbps downstream speed
  • Supports Annex M, which can double upstream data rates
  • Built-in switch connects four local PCs directly, and daisy-chain out to more hubs and switches as your network grows
  • Built-in DHCP server
  • Administer and Upgrade the Router Remotely over the Internet
  • Easy Setup Assistant provides quick & hassle free installation

Software Specification
ADSL Features
Full-rate ANSI T1.413 Issue 2
ITU-T G.992.1 (G.dmt)
ITU-T G.992.2 (G.lite)
ITU-T G.994.1 (G.hs)
ITU-T G.992.3 (G.dmt.bis)
ITU-T G.992.5
Max 6 kilometers
Data Rates
Downstream: Up to 24Mbps
Upstream: Up to 3.5Mbps (With Annex M enabled)
ATM Features
UNI 3.1,ATM Adaptation Layer Type 5-AAL5
Multiprotocol encapsulation over ATM (RFC 1483)
UBR, CBR, VBR-rt, VBR-nrt
Supports 8PVCs
PPP Features
PPP over ATM (RFC 2364)
PPP over Ethernet (RFC 2516)
Switching Features
IEEE 802.1d transparent learning bridging
Routing Features
Classical IP and ARP over ATM (RFC 1577/2225), MER
Static routing, IP, TCP, UDP, ARP
NAT, NAPT, DNS, DDNS, DHCP Server
UPnP, Virtual Server, DMZ, Port Trigger
Security
NAT
IP filterling
MAC filtering
Parental control
VPN Pass Through
IPSec/PPTP/L2TP Pass-through
QoS
IP Type of service(ToS)
802.1p
Device Management
HTTP, TELNET, Console
Administration and operation software (firmware) upgradable locally by web(HTTP), console(TFTP)
SNMP

Ports
4 10/100M LAN Ports(RJ45)
1 Line Port(RJ11)
LED Indicators
Power?ADSL?Internet?LAN 1~4
Dimensions (W*D*H)
6.9*4.7*1.1 in.(174x 120x28.8mm)
Environment
Operating Temperature: 0?~40? (32?~104?)
Storage Temperature: -40?~70? (-40?~158?)
Operating Humidity: 10%~90% non-condensing
Storage Humidity: 5%~90% non-condensing

Source: TP-Link.com

2 comments:

Lam said...

HI, i m having problem to setup my streamyx with a tplink td-8840. I have inserted the right user id and password but it doesnt seems to connect to the internet.. what would have gone wrong?
i have set to PPPoE with PVC - 0 and PCI - 35, what else do i need to take note?

Daisy Jones said...

very helpful! Here you will get all kind of solution like

dlink setup page
D-link router reset
D-link Technical Support

Post a Comment

Related Posts Plugin for WordPress, Blogger...