Aztech DSL605E

ADSL2+ Ethernet Modem / Router

The Aztech DSL605E ADSL2+ Ethernet Bridge Modem uses Texas Instruments AR7 Chipset solution that fully complies with ANSI T1.413 Issue 2, ITU-T G.992.1 (G.dmt) G.992.2 (G.lite). Aztech DSL605E ADSL2+ Ethernet Bridge Modem also provides higher data transmission rates with ADSL2 (G.992.3 & G.992.4), ADSL2+ (G.992.5), Extended Reach-ADSL support. The ADSL2+ Ethernet Bridge Modem will be providing up to 12Mbps speed and additional 600 feet reach for ADSL2 and 26Mbps speed for distances up to 5,000 feet for ADSL2+.

The ADSL2+ Ethernet Bridge Modem is targeted at the residential users. Designed for High Speed Broadband Networks, the ADSL2+ Ethernet Bridge Modem is also for both the single user with Bridge mode with host based PPPoE Client or for multi-users utilizing the DSL605E inbuilt PPPoE/A, IP routing, NAT functionality to share the ADSL link.

The ADSL2+ Ethernet Bridge Modem comes with the Packet Filtering firewall and DMZ support for a full security options against malicious hackers.


PRODUCT SPECIFICATIONS

ADSL/ATM Support
ANSI T1.413 issue 2, ITU-T G.992.1 (G.dmt) and G.992.2 (G.lite) compliant
bullet01 G.992.3(ADSL2), G.992.5(ADSL2+), RE-ADSL compliant
bullet01 Rate Adaptive modem at 32 Kbps steps
bullet01 Dynamic Adaptive Equalization to improve Carrier’s service area
bullet01 Bridge Tap Mitigation support
bullet01 ATM Layer with Traffic shaping QoS Support (UBR, CBR, VBR-rt, VBR-nrt)
bullet01 AAL ATM Attributes - AAL5
bullet01 Multiple PVC up to 8 support (Bridge Support)
bullet01 Spectral compatibility with POTS
bullet01 F4 & F5 OAM Loop back/Send and Receive
bullet01 TR-067 Test Report available
Encapsulation Support
RFC2684 Bridge (default) and Routed LLC and VC Mux support
RFC2364 PPPoA Client support
RFC2516 PPPoE Client support
Transparent Bridge Support
PAP/CHAP/MS-CHAP for Password Authentication Support
Network Support
Static IP support
Dynamic RIP routing support (with memory and firmware upgrade)
IP/TCP/UDP/ICMP/ARP/RARP Application Support
Network Address Translation (NAT)
Port Mapping/Forwarding
Easy setup of Port Forwarding rules for popular Games/Application
NAT Application Level Gateway for popular applications
DHCP Server/Relay/client
DNS Relay Agent
DMZ support
Multiple Sessions IP Sec and PPTP/L2TP VPN pass through support
PPP Always on with configurable timeout
bullet01 PPP Dial on Demand
bullet01 SNTP Support
bullet01 IGMP Support (v1 and v2)
bullet01 QoS Support (DSCP, TOS)
bullet01 PPP/DHCP Auto Detection
Management Support
Web Based HTTP management GUI
Web Based Firmware Upgrade (Local)
Soft Factory Reset Button via Web GUI
Diagnostic Test (DSL, OAM, Network, Ping Test)
TR068-WAN Access
Telnet/CLI (Read and Write)
Syslog Support
Firmware upgrade-able for future feature enhancement
bullet01 SNMP trap
Security Support
NAT for basic Firewall support
Packet Filtering Firewall Support
Stateful Packet Inspection Support
Protection against Denial of Service attacks
Password Authentication to Modem
bullet01 Two-Level Password protection
Hardware
Texas Instrument TNETD7100A2 Single Chip Network Processor/AFE/Line Driver Chipset
2 MB Flash ROM
8 MB SDRAM
bullet01 Dying Gasp
bullet01 ITU K.21 Support
bullet01 GDT Support
bullet01 DSL Forum TR-068 compliant

* Feature subject to change
Platform support
For Ethernet :
OS Independent
Power Requirements
Input Voltage : 9V DC +/- 10%
Input Current : 1A
Physical Specifications
LED Indicators :
- 1 x "Power" (Green/Red) LED
- 1 x "Ethernet" Link/Activity Status (Green) LED
- 1 x "DSL" Link Status (Green) LED
External Connectors :
- 1 x RJ-11 Telephone socket for ADSL line
- 1 x RJ45 for 10/100Base-T Ethernet (MDI/MDI-X)
- 1 x DC Jack for Power Input
- 1 x Factory Default Reset Button
- 1 x On/Off Push Button Switch
Measurements :
- Dimension : 105 (L) x 105 (W) x 30 (H) mm
- Weight : Approx. 250g
Regulatory Approvals (Pending)
Asia Pacific /Europe : CE, IEC 60950
bullet01 Malaysia : SIRIM
bullet01 Singapore : IDA (TBC)
bullet01 Australia : A-tick/C-tick (TBC)
Temperature

Operating :

0o to 40 o Celsius
32 o to 104 o Fahrenheit

Non-Operating :

-25 o to 70 o Celsius
-13 o to 158 o Fahrenheit

Humidity

Operating :

8% to 95% Relative Humidity (Non-Condensing)

Non-Operating :

5% to 95% Relative Humidity (Non-Condensing)



Source:
Aztech.com

0 comments:

Post a Comment

Related Posts Plugin for WordPress, Blogger...