PROLiNK Hurricane 5201

1-Port Ethernet ADSL2+ Modem Router

PROLiNK® H5201 is a 1-Port ADSL2+ Modem Router specifically designed to connect to the Internet or get you directly connected to your Local Area Network (LAN) via hi-speed 10/100 Mbps Ethernet.

Compatible with the latest ADSL standards including ADSL2 and ADSL2+, it supports up to 26 Mbps downstream and 3 Mbps upstream to deliver true broadband speed. An ideal solution for muilti-users utilising built-in channel mode (PPPoE/A, IPoA, IPoE), IP routing and NAT functionalities sharing the ADSL link.

Enhanced Lightning Protection
Your worries are unfounded with this feature that safeguards your peripheral on stormy days when lightning strikes could cause a hazard.

Enjoy Hi-Speed Internet Access
Enjoy non-laggy and hi-speed downstream up to 26 Mbps and 3 Mbps of upstream, access with computers, media players and application server within your home and office.

Universal Plug-n-Play + Zero Configuration
Forget about any installation or configuration by simply plug-in the modem and surf the web in an instant. It also helps to diagnose and troubleshoot physical cable problems or login authentication problems.

APPLICATION

Streamyx DSL Broadband Internet Connection Quick Installation Guide

SPECIFICATION

ADSL Compliance	G.Lite/G.DMT/T1.413/ADSL2/ADSL2+ Auto-negotiating rate adaptation Downstream up to 26 bps, upstream up to 3 Mbps Annex L/M support, Dying grasp support (Optional)
Advanced Firewall	Network Address Translation (NAT), MAC Filtering, URL/Domain (Web-site Filtering) Stateful Packet Inspection (SPI) and protection against Denial of Service (DoS) attacks IP/Port Filtering, DMZ Support, VPN Pass-through, Port Forwarding (Virtual Server)
Software Features	DHCP Client/Server/Relay DNS Relay Agent, Dynamic DNS (DDNS), IGMP Proxy/Snooping, Quality of Service (QoS)
Device Management	Web-based Configuration Telnet Remote Management, SNMP v1/v2/Trap, Diagnostic Tool, UPnP Support Firmware Upgrade through FTP/TFTP and HTTP, Access Control List (ACL) TR069 Support
Hardware Interface	One RJ-45 port for 10/100 Base-T Ethernet LAN connects to PC or network switch One RJ-11 port for ADSL line connection One reset button to default settings One power jack One on/off switch
Min System Requirements	Internet Explorer 6 Computer equipped with Network Interface Card (NIC) OS independence for Ethernet connection