ADSL Compliance • Compliant with ADSL Standard - Full-rate ANSI T1.413 Issue 2 - G.dmt (ITU G.992.1) - G.lite (ITU G.992.2) - G.hs (ITU G.994.1) - ADSL over ISDN/U-R2 • Compliant with ADSL2 Standard - G.dmt.bis (ITU G.992.3) - ADSL2 Annex M (ITU G.992.3 Annex M) (BiPAC 7300(G)RA A only) • Compliant with ADSL2+ Standard - G.dmt.bisplus (ITU G.992.5) - ADSL2+ Annex M (ITU G.992.5 Annex M) (BiPAC 7300(G) RA A only) Network Protocols and Features • NAT, static routing and RIP-1/2 • NAT supports PAT and multimedia applications • Transparent Bridging • Virtual Server and DMZ • SNTP, DNS relay and DDNS • IGMP snooping and IGMP proxy Firewall & Virtual Private Network (VPN) • Built-in NAT Firewall • Stateful Packet Inspection (SPI) • Prevents DoS attacks including Land Attack, Ping of Death, etc. • Remote access control for web base access • Packet and URL filtering • Password protection for system management • VPN pass-through Quality of Service Control • Supports the DiffServ approach • Traffic prioritization based-on IP protocol,port number and address Wireless LAN (BiPAC 7300G RA) • Compliant with IEEE 802.11g and 802.11b standards • 2.4 GHz – 2.484G Hz frequency range • Up to 54 Mbps wireless operation rate • Auto channel select • 64/128 bits WEP supported for encryption • Wireless Security with WPA-PSK/WPA2-PSK support • WDS repeater function support ATM and PPP Protocols • ATM Adaptation Layer Type 5 (AAL5) • Multiple Protocol over AAL5 (RFC 2684, formerly RFC 1483) • Bridged or routed Ethernet encapsulation • VC and LLC based multiplexing • PPP over Ethernet (PPPoE) • PPP over ATM (RFC 2364) • OAM F4/F5 Management • Quick Installation Wizard and Auto-scan ADSL settings • Web-based for remote and local management • Firmware upgrades and configuration data upload/download via web-based interface • Embedded Telnet server for local management • SNMP v1/v2/v3, MIB-I and MIB-II support • Available Syslog monitoring • Supports DHCP server/client/relay • Mail Alert Operating Environment • Operating temperature: 0 - 40ºC • Storage temperature: -20 - 70ºC • Humidity: 20 - 95% non-condensing Hardware Specifications Physical Interface (BiPAC 7300G RA) • WLAN: 1 detachable antenna • LINE: ADSL port • LAN: 4-port 10/100M auto-crossover (MDI/MDI-X) switch • Factory default reset button • Power jack • Power switch Physical Interface (BiPAC 7300G RA) • Power jack • Factory default reset button • LAN: 4-port 10/100M auto-crossover (MDI/MDI-X) switch • LINE: ADSL port Physical Specifications • BiPAC 7300G RA Dimensions: 7.28" x 4.86" x 1.42" (185mm x 123.5mm x 35mm) • BiPAC 7300 RA Dimensions: 5.51" x 3.54" x 1.38” (140.5mm*90.5mm*35mm) Power Requirements • Input: 12V DC, 1A Models & Supported Standards • BiPAC 7300(G) RA A: Annex A & Annex M (Annex A and Annex M: ADSL over POTS) • BiPAC 7300(G) RA U: Annex B & U-R2 (Annex B and Annex U-R2: ADSL over ISDN) *Notes: 1. The router may require firmware modification for certain ADSL2/2+/ Annex M DSLAMs. 2. Specifications in this datasheet are subject to change without prior notice. |
1 comments:
What does Ethernet over Fixed Wireless have to offer? You’ll get speeds similar to wireline services, secure data transmission, fast installation and a service level agreement. In other words, a dedicated wireline connection without the wireline.
Post a Comment