TP-Link TD-8811

External ADSL2+ Modem Router

Description:

TD-8811 uses integrated ADSL2+ transceiver and a 256-MHz MIPS32 CPU.The AFE supports full-rate ADSL connectivity conforming to the ITU and ANSI specifications; MIPS32 CPU with MMU and 16-KB I-cache/8-KB D-cache is integrated into the device. In addition to the basic DMT physical layer functions, the ADSL PHY supports dual latency ADSL Framing (fast and interleaved) and the I.432 ATM Physical Layer.TD-8811 is a complete plug-and-play solution. With standard Ethernet interface, it can be directly connected to any 10M/100M Ethernet devices,supporting Auto MDI/MDIX.

TD-8811 not only use html (web mode through Ethernet port) to configure the MODEM but also use external utility software, too. With TP-LINK´s excellent design of circuit and high quality production, we guarantee ADSL MODEM a high performance, very good stability and easy to use.

Features:
  • Access a high-speed DSL Internet connection
  • Up to 24Mbps downstream speed
  • Supports Annex M, which can double upstream data rates
  • Connect your computer using Ethernet or USB
  • Built-in DHCP server
  • Administer and Upgrade the Router Remotely over the Internet
  • Easily configure the router with the attached utility

Software Specification
ADSL Features
Full-rate ANSI T1.413 Issue 2
ITU-T G.992.1 (G.dmt)
ITU-T G.992.2 (G.lite)
ITU-T G.994.1 (G.hs)
ITU-T G.992.3 (G.dmt.bis)
ITU-T G.992.5
Max 6 kilometers
Data Rates
Downstream: Up to 24Mbps
Upstream: Up to 3.5Mbps (With Annex M enabled)
ATM Features
UNI 3.1,ATM Adaptation Layer Type 5-AAL5
Multiprotocol encapsulation over ATM (RFC 1483)
UBR, CBR, VBR-rt, VBR-nrt
Supports 8PVCs
PPP Features
PPP over ATM (RFC 2364)
PPP over Ethernet (RFC 2516)
Switching Features
IEEE 802.1d transparent learning bridging
Routing Features
Classical IP and ARP over ATM (RFC 1577/2225), MER
Static routing, IP, TCP, UDP, ARP
NAT, NAPT, DNS, DDNS, DHCP Server
UPnP, Virtual Server, DMZ, Port Trigger
Security
NAT
IP filterling
MAC filtering
Parental control
VPN Pass Through
IPSec/PPTP/L2TP Pass-through
QoS
IP Type of service(ToS)
802.1p
Device Management
HTTP, TELNET, Console
Administration and operation software (firmware) upgradable locally by web(HTTP), console(TFTP)
SNMP

Hardware Specification
Ports
1 10/100M LAN Port(RJ45)
1 Line Port(RJ11)
1 USB 1.1 port
LED Indicators
USB, LAN, ADSL, Alarm, ACT, Power
Dimensions (W*D*H)
6.5*4.3*1.1 in.(165*108*28 mm)
Environment
Operating Temperature: 0℃~40℃ (32℉~104℉)
Storage Temperature: -40℃~70℃ (-40℉~158℉)
Operating Humidity: 10%~90% non-condensing
Storage Humidity: 5%~90% non-condensing

Source: TP-Link.com

1 comments:

Daisy Jones said...

Thanks for give us valuable information If you are Looking for D-link Support , visit on

D link default password
dlink router
D-link Support Number Australia

Post a Comment

Related Posts Plugin for WordPress, Blogger...