Aztech DSL605ER

ADSL2+ 4-Port Router

The Aztech DSL605ER ADSL2+ 4 Port Ethernet Router uses new Generation Texas Instruments AR7 Chipset solution that fully complies with ANSI T1.413 Issue 2, ITU-T G.992.1 (G.dmt) and G.992.2 (G.lite) ADSL standard. The ADSL2+ 4-Port Router also supports higher data transmission rates with ADSL2 (G.992.3), ADSL2+(G.992.5), and Extended Reach-ADSL. This next generation ADSL2+ 4-Port Router will be providing up to 12Mbps speed and additional 600 feet reach for ADSL2 and 26Mbps speed for distances up to 5,000 feet for ADSL2+.

Targeted at the residential and SOHO users, the ADSL2+ 4-Port Router is the ideal solution to provide a 4 in 1 device for both high speed broadband connectivity via a combined ADSL2/2+ ready Modem support, Routing functionality for multi-user sharing, 4 port AutoMDI/MDIx 10/100 Switch and true Firewall capability functionality.

Security is provided via a double Stateful Packet Inspection and NAT based Firewall. VPN Pass-through and DMZ support provide additional security support for telecommuters as well as allow flexibility while maintaining security against malicious hackers. With Universal Plug and Play support, home networking becomes a breeze for everyone in the family. Multi Port Range/Popular Application Forwarding makes it even easier to select which application you want your network to allow while ensuring your security at the same time.


ADSL/ATM Support
ANSI T1.413 issue 2, ITU-T G.992.1 (G.dmt) and G.992.2 (G.lite) compliant
bullet01 G.992.3 (ADSL2), G.992.5 (ADSL2+), RE-ADSL Ready
bullet01 Rate Adaptive modem at 32 Kbps steps
bullet01 Dynamic Adaptive Equalization to improve Carrier’s service area
bullet01 Bridge Tap Mitigation support
bullet01 ATM Layer with Traffic shaping QoS Support (UBR, CBR, VBR-rt, VBR-nrt)
bullet01 AAL ATM Attributes - AAL5
bullet01 Support multiple WAN Connection (PVC) up to 8
bullet01 Spectral compatibility with POTS
bullet01 F4 & F5 OAM Loopback/Send and Receive
Encapsulation Support
RFC2684 Bridge and Routed LLC and VC Mux support
RFC2364 PPPoA Client support
RFC2516 PPPoE Client support
Transparent Bridge Support
PAP/CHAP/MS-CHAP for Password Authentication Support
Network Support
Static IP support
Dynamic RIP routing support (with memory and firmware upgrade)
IP/TCP/UDP/ICMP/ARP/RARP Application Support
Network Address Translation (NAT)
Port Mapping/Forwarding
Easy setup of Port Forwarding rules for popular Games/Application
NAT Application Level Gateway for popular applications
DHCP Server/Relay/client
DNS Relay Agent
DMZ support
PVC to VLAN Mapping
Multiple Sessions IP Sec and PPTP/L2TP VPN pass through support
bullet01 PPP Always on with configurable timeout
bullet01 PPP Dial on Demand
bullet01 Universal Plug and Play Support (UPnP)
bullet01 SNTP Support
bullet01 IGMP Support (v1 and v2)
bullet01 DDNS (Dynamic DNS) Support
bullet01 QoS Support (DSCP, TOS)
bullet01 PPP/DHCP Auto Detection
Management Support
Web Based HTTP management GUI
Web Based Firmware Upgrade (Local)
Soft Factory Reset Button via Web GUI
Telnet/CLI (Read Only)
Syslog Support
Firmware upgrade-able for future feature enhancement
TR-069 support option (with memory and firmware upgrade)
Diagnostic Test (DSL, OAM, Network, Ping test)
bullet01 TR068-WAN Access
bullet01 SNMP trap
Security Support
NAT for basic Firewall support
Packet Filtering Firewall Support
Stateful Packet Inspection Support
Protection against Denial of Service attacks
Password Authentication to Modem
bullet01 Two-Level Password protection
Texas Instrument TNETD7300EZDW (TI7200) Single Chip Network Processor/AFE/Line Driver Chipset
IC Plus IP175C 5 PORT 10/100 MAC/PHY Switch (Support Auto MDI/MDIx)
4 MB Flash ROM
bullet01 16 MB SDRAM
bullet01 Dying Gasp Support
bullet01 ITU K.21 Support
bullet01 GDT Support
Platform support
For Ethernet :
OS Independent
Power Requirements
Input Voltage : 9V DC +/- 10%
Input Current : 1.0A
Physical Specifications
LED Indicators :
- 1 x "Power" (Green and Red) LED
- 4 x Ethernet Link/Activity Status (Green) LED
- 1 x "DSL" Link Status (Green) LED
- 1 x "Internet" (Green and Red) LED
External Connectors :
- 1 x RJ-11 Telephone socket for ADSL line
- 4 x RJ45 for 10/100Base-T Ethernet (AutoMDI/MDIx)
- 1 x DC Jack for Power Input
- 1 x Factory Default Reset Button
- 1 x On/Off Power Switch
Measurements :
- Dimension : 156MM x 130MM x 29MM
- Weight : Approx. 350 g
Regulatory Approvals (Pending)
bullet01 Asia Pacific /Europe : CE, IEC 60950
bullet01 Malaysia : SIRIM
bullet01 Singapore : IDA (TBC)
bullet01 Australia : A-tick/C-tick (TBC)

Operating :

0o to 40 o Celsius
32 o to 104 o Fahrenheit

Non-Operating :

-25 o to 70 o Celsius
-13 o to 158 o Fahrenheit


Operating :

8% to 95% Relative Humidity (Non-Condensing)

Non-Operating :

5% to 95% Relative Humidity (Non-Condensing)



Post a Comment

Related Posts Plugin for WordPress, Blogger...