Aztech DSL605EW

ADSL2+ Wireless 4-Port Router

The Aztech DSL605EW ADSL2+ Wireless 4 Port Router uses new generation Texas Instruments AR7 with 1350A for wireless combined Chipset solution that fully complies with ANSI T1.413 Issue 2, ITU-T G.992.1 (G.dmt) and G.992.2 (G.lite), ADSL standard. The ADSL2+ Wireless 4-Port Router also provides future proof functionality with higher data transmission rates with ADSL2, ADSL2+, and Extended Reach-ADSL support. This next generation ADSL2+ Wireless 4-Port Router will be providing up to 12Mbps speed and additional 600 feet reach for ADSL2 and 26Mbps speed for distances up to 5,000 feet for ADSL2+.

The Aztech DSL605EW ADSL2+ Wireless LAN 4 Port Ethernet Router is targeted at the residential and SOHO users. Designed for high speed broadband networks, the ADSL2+ Wireless 4-Port Router is the ideal solution to provide a 6 in 1 device for both Wired and Wireless connectivity via a combined ADSL2/2+ Ready Modem support, Routing functionality for multi-user sharing, 4 port AutoMDI/MDIx 10/100 Managed Switch for future IPTV deployment, high speed 125Mbps IEEE802.11b/g/g++ Wireless LAN Access point and true firewall capability functionality.

Security for the Aztech DSL605EW ADSL2+ Wireless 802.11g++ Router is provided via a double Stateful Packet Inspection and NAT based firewall and Hardware accelerated AES/WEP/WPA based encryption/MAC Address Filtering for Wireless links. VPN Pass-through and DMZ support provide additional security support for telecommuters as well as allow flexibility while maintaining security against malicious hackers.

With Universal Plug and Play support, home networking becomes a breeze for everyone in the family. Multi Port Range/Popular Application Forwarding makes it even easier to select which application you want your network to allow while ensuring your security at the same time.


ADSL/ATM Support
ANSI T1.413 issue 2, ITU-T G.992.1 (G.dmt) and G.992.2 (G.lite) compliant
bullet01 G.992.3 (ADSL2), G.992.5 (ADSL2+), RE-ADSL Ready
bullet01 Rate Adaptive modem at 32 Kbps steps
bullet01 Dynamic Adaptive Equalization to improve Carrier's service area
bullet01 Bridge Tap Mitigation support
bullet01 ATM Layer with Traffic shaping QoS Support (UBR, CBR, VBR-rt, VBR-nrt)
bullet01 AAL ATM Attributes - AAL5
bullet01 Supports 8 multiple PVC (up to 16 PVC Bridge Support)
bullet01 Spectral compatibility with POTS
bullet01 F4 & F5 OAM Loopback/Send and Receive
bullet01 TR-067 compliant
Encapsulation Support
RFC2684 Bridge and Routed LLC and VC Mux support
RFC2364 PPPoA Client support
RFC2516 PPPoE Client support
RFC2225/RFC1577 Classical IP Support
Transparent Bridge Support
bullet01 PAP/CHAP/MS-CHAP for Password Authentication Support
Network Support
Static IP, Dynamic RIP routing support
IP/TCP/UDP/ICMP/ARP/RARP Application Support
Network Address Translation (NAT)
Port Mapping/Forwarding/Triggering
Easy setup of Port Forwarding rules for popular Games/Application
NAT Application Level Gateway for popular applications
DHCP Server/Relay/client
DNS Relay Agent
DMZ support
PVC to VLAN Mapping
Multiple Sessions IP Sec and PPTP/L2TP VPN pass through support
PPP Always on with configurable timeout
bullet01 PPP Dial on Demand
bullet01 Universal Plug and Play Support
bullet01 SNMP v1 and v2
bullet01 Multi NAT support
bullet01 Easy Connect Support
bullet01 DDNS (Dynamic DNS) Support
bullet01 IGMP Proxy Support (IGMP v1 and v2)
bullet01 SNTP Support
bullet01 QoS Support (DSCP, TOS)
bullet01 PPP/DHCP Auto Detection
WLAN Support
IEEE 802.11, 802.11b and 802.11g compliant
Supports 802.11b, 802.11g and 802.11g++ simultaneously
Transmit output power up to 20dBm (standard)
Transmit output power up to 23dBm with change to 5V high-power 1350A daughter board
Conforms to Wireless Ethernet Compatibility Alliance (WECA) Wireless Fidelity (Wi-Fi tm) Standard
Support seamless WLAN roaming
Frequency Band :
- 2412 MHz - 2462 MHz (North America/FCC)
- 2412 MHz - 2472 MHz (ETSI/Europe)
- 2412 MHz - 2484 MHz (Japan)
- 2457 MHz - 2472 MHz (France)
- 2457 MHz - 2462 MHz (Spain)
Support Direct Sequence Spread Spectrum (DSSS) technology
Modulation : OFDM with BPSK, QPSK, 16QAM, 64QAM, DBPSK, DQPSK, CCK
Wireless Media Access Protocol- CSMA/CA with ACK
64/128/256Bit WEP Encryption
WPA/WPA2 Support
bullet01 Dynamic Rate Scaling from 125, 54, 48, 36, 24, 12, 11, 9, 6, 5.5, 2, 1 Mb/s
bullet01 Operating Range of >300 Meters (Open Air)
bullet01 Extended Range with 802.11g++ support
bullet01 WDS Support (Wireless Distribution System)
bullet01 Multiple SSID Support
Management Support
Web Based HTTP management GUI
TFTP/FTP Support for Firmware Upgrade
Web Based Firmware Upgrade (Local)
Soft Factory Reset Button via Web GUI
Diagnostic Test (DSL, OAM, Network, Ping Test)
TR068 - WAN Access
Telnet/CLI (Read and Write)
Syslog Support
bullet01 Firmware upgrade-able for future feature enhancement
bullet01 TR-069 Support with firmware upgrade
bullet01 SNMP trap
Security Support
NAT for basic Firewall support
Packet Filtering Firewall Support
Stateful Packet Inspection Support
Protection against Denial of Service attacks
Password Authentication to Modem
bullet01 Two-Level Password protection
Texas Instrument TNETD7300EZDW (TI7200) Single Chip Network Processor/AFE/Line Driver Chipset
IC Plus IP175C 5 PORT 10/100 MAC/PHY Switch (Support Auto MDI/MDIx)
Texas Instrument TNETW1350A based IEEE802.11b/g Daughter Board
bullet01 4 MB Flash ROM
bullet01 16 MB SDRAM
bullet01 Dying Gasp Support
bullet01 ITU K.21 Support
bullet01 GDT Support
Platform support
For Ethernet and Wireless LAN
OS Independent
Power Requirements
Input Voltage : 9V DC +/- 10%
Input Current : 1.0A
Physical Specifications
LED Indicators :
- 1 x "Power" LED (Green and Red LED)
- 4 x Ethernet Link Status (Green) LED
- 1 x "Wireless" LAN Link/Activity Status (Green) LED
- 1 x "DSL" Status (Green) LED
- 1 x "Internet" Status (Green and Red) LED
External Connectors :
- 1 x RJ-11 Telephone socket for ADSL line
- 4 x RJ45 for 10/100Base-T Ethernet (AutoMDI/MDIx)
- 1 x DC Jack for Power Input
- 1 x Factory Default Reset Button
- 1 x On/Off Power Switch
- 2 x 360° Rotate-able 2.4Ghz 3 dBi Antenna (deachable)
Measurements :
- Dimension : 156MM x 135MM x 34MM
- Weight : Approx. 250 g
Regulatory Approvals (Pending)
bullet01 Asia Pacific /Europe : CE, IEC 60950
bullet01 Malaysia : SIRIM
bullet01 Singapore : IDA (TBC)
bullet01 Australia : A-tick/C-tick (TBC)

Operating :

0o to 40 o Celsius
32 o to 104 o Fahrenheit

Non-Operating :

-25 o to 70 o Celsius
-13 o to 158 o Fahrenheit


Operating :

8% to 95% Relative Humidity (Non-Condensing)

Non-Operating :

5% to 95% Relative Humidity (Non-Condensing)



Post a Comment

Related Posts Plugin for WordPress, Blogger...