Aztech DSL705EU

ADSL2+ Ethernet USB Combo Modem

The Aztech DSL705EU ADSL2+ Ethernet USB Combo is designed with the latest Infineon Amazon SE Chip solution that fully complies with ANSI T1.413 Issue 2, ITU-T G.992.1 (G.dmt) and G.992.2 (G.lite) ADSL standard. Aztech DSL705EU also provides higher data transmission rates with ADSL2 (G.992.3 & G.992.4), ADSL2+ (G.992.5), Extended Reach-ADSL support. This modem/router is able to support to up to 12Mbps speed and additional 600 feet reach for ADSL2 and 26Mbps speed for distances up to 5,000 feet for ADSL2+.

Targeted at the residential users, it is for both the single user with Bridge mode with host based PPPoE Client or for multi-users utilizing the DSL705EU inbuilt PPPoE/A, IP routing, NAT functionality to share the ADSL link.

Aztech DSL705EU also comes with Stateful Packet Inspection firewall and DMZ support for extensive internet security for private data against malicious hackers.


ADSL/ATM Support

ANSI T1.413 issue 2, ITU-T G.992.1 (G.dmt) and G.992.2 (G.lite) compliant
bullet01 G.992.3(ADSL2), G.992.5(ADSL2+), RE-ADSL compliant
bullet01 ADSL2, ADSL2+, RE-ADSL compliant
bullet01 Rate Adaptive modem at 32 Kbps steps
bullet01 Dynamic Adaptive Equalization to improve Carrier’s service area
bullet01 Bridge Tap Mitigation support
bullet01 ATM Layer with Traffic shaping QoS Support (UBR, CBR, VBR-rt, VBR-nrt)
bullet01 AAL ATM Attributes - AAL5
bullet01 Multiple PVC up to 8 support (Bridge Support)
bullet01 Spectral compatibility with POTS
bullet01 F4 & F5 OAM Loop back/Send and Receive
bullet01 Annex B Option available
bullet01 TR-067 Compliant
Encapsulation Support
RFC2684 Bridge and Routed LLC and VC Mux support
RFC2364 PPPoA Client support
RFC2516 PPPoE Client support
Transparent Bridge Support
PAP/CHAP/MS-CHAP for Password Authentication Support
Network Support
Static IP support
IP/TCP/UDP/ICMP/ARP/RARP Application Support
Network Address Translation (NAT)
Port Forwarding
Easy setup of Port Forwarding rules for popular Games/Application
NAT Application Level Gateway for popular applications
DHCP Server/Relay/client
DNS Relay Agent
DMZ support
Multiple Sessions IP Sec and PPTP/L2TP VPN pass through support
PPP Always on with configurable timeout
PPP Dial on Demand
bullet01 Universal Plug and Play Support (UPnP)
bullet01 SNTP Support
bullet01 QoS Support (DSCP, TOS)
bullet01 PPP/DHCP Auto Detection
Management Support
Web Based HTTP management GUI
Web Based Firmware Upgrade (Local)
Soft Factory Reset Button via Web GUI
Diagnostic Test (DSL, OAM, Network, Ping Test)
Syslog Support
Firmware upgradeable for future Feature Enhancement
bullet01 TR-064, TR-069 support option
Security Support
NAT for basic Firewall support
Packet Filtering Firewall Support
Parental Control Support
Application Filtering Support
Password Authentication to Modem
Infineon Amazon-SE PSB50600 Chip
2 MB Flash ROM (Population Option of 4MB)
8 MB SDRAM (Population Option of 16MB)
bullet01 Dying Gasp Support (Population Option)
bullet01 ITU K.21 Support
bullet01 GDT Support (Population Option)
bullet01 Compliant to TR-068 spec for LED and Connectors
Platform support
For Ethernet :
-OS Independent

For USB drivers :
-Windows XP/Vista and Windows 7

Power Requirements
Input Voltage : 12V DC +/- 10%
Input Current : 0.42A
Physical Specifications

LED Indicators :
- 1 x "Power" (Green/Red) LED
- 1 x "Ethernet" Link/Activity Status (Green) LED
- 1 x “USB” Status (Green) LED
- 1 x “DSL” Link Status (Green) LED
- 1 x “Internet” (Green/Red) LED

External Connectors :
- 1 x RJ-11(Gray Color) Telephone socket for ADSL line
- 1 x RJ45(Yellow Color) for 10/100Base-T Ethernet
- 1 x USB 1.1(Blue Color) Type B Connector
- 1 x DC Jack for Power Input
- 1 x Factory Default Reset Button
- 1 x On/Off Push Button Switch
Measurements :
- Dimension : 105mmx85mmx27mm

Operating :

0°C to 40°C

Non-Operating :

-25°C to 70°C


Operating :

8% to 95% Relative Humidity (Non-Condensing)

Non-Operating :

5% to 95% Relative Humidity (Non-Condensing)



Post a Comment

Related Posts Plugin for WordPress, Blogger...