Aztech DSL1000E(T)

ADSL2/2+ Ethernet Modem Router

The Aztech DSL1000E(T) ADSL 2/2+ Ethernet Modem Router uses Broadcom BCM6338 ADSL2+ single Chip solution that fully complies with ANSI T1.413 Issue 2, ITU-T G.992.1 (G.dmt) and G.992.2 (G.lite) ADSL standard. Aztech DSL1000E(T) also provides higher data transmission rates with ADSL2, ADSL2+, and Extended Reach-ADSL support. This next generation ADSL router will provides up to 12Mbps speed with an additional 600 feet reach for ADSL2; and up to 30Mbps speed with distance up to 5,000 feet for ADSL2+ Support. In addition, with ADSL2+ Annex M support, upstream rate will be improved to up to 3Mbps.

Targeted at the residential users, it is for both single user using Bridge mode with host based PPPoE Client and multi-users utilizing the DSL1000E(T) 's inbuilt PPPoE/A, IP routing, NAT functionality to share the ADSL link.

It comes with the Packet Filtering firewall and DMZ support for a full security options against malicious hackers. With the optional Universal Plug and Play support, home networking becomes a breeze for everyone in the family. Multi Port Range/Popular Application Forwarding makes it even easier to select which application you want your network to allow while ensuring your security at the same time.

PRODUCT SPECIFICATIONS

ADSL/ATM Support

ANSI T1.413 issue 2, ITU-T G.992.1 (G.dmt) and G.992.2 (G.lite) compliant ITU-T G.992.1 (G.dmt Annex B) Population Option ADSL2, ADSL2+, RE-ADSL compliant ADSL2+ Annex M Support Rate Adaptive modem at 32 Kbps steps TR-067 Compliance ATM Layer with Traffic shaping QoS Support (UBR, CBR, VBR-rt, VBR-nrt) AAL ATM Attributes - AAL5 Multiple PVC up to 8 support Spectral compatibility with POTS F5 OAM Loopback/Send and Receive

Encapsulation Support

RFC2684 Bridge and Routed LLC and VC Mux support RFC2364 PPPoA Client support RFC2516 PPPoE Client support RFC2225/RFC1577 Classical IP Support Transparent Bridge Support PAP/CHAP/MS-CHAP for Password Authentication Support

Network Support

Static IP, Dynamic RIP routing support IP/TCP/UDP/ICMP/ARP/RARP Application Support Network Address Translation (NAT) Port Mapping/Forwarding Easy setup of Port Forwarding rules for popular Games/Application NAT Application Level Gateway for popular applications DHCP Server/Relay/client DNS Relay Agent DMZ support Single Session IP Sec and PPTP/L2TP VPN pass through support PPP Always on with configurable timeout PPP Dial on Demand Universal Plug and Play Support (Optional)

Management Support

Web Based HTTP management GUI TFTP/FTP Support for Firmware Upgrade Web Based Firmware Upgrade (Local) Soft Factory Reset Button via Web GUI Diagnostic Test (DSL, OAM, Network, Ping Test) Telnet/CLI (Read Only) Syslog Support TR-069 Remote Management Support Firmware upgrade-able for future feature enhancement

Security Support

NAT for basic Firewall support Packet Filtering Firewall Support Stateful Packet Inspection Support Protection against Denial of Service attacks Password Authentication to Modem

HARDWARE

Broadcom BCM6338 Single Chip ADSL2+ Transceiver Broadcom BCM6301 Line Driver 4 MB Flash ROM (Population Option of 0.5MB SPI Flash (Bridge only) or 2MB NOR Flash) 16 MB SDRAM (Population Option of 4MB or 8MB) Dying Gasp Support (Population Option) ITU K.21 Support (Population Option) 10KV Surge Protection Support (Population Option)

PLATFORM SUPPORT

For Ethernet OS Independent

POWER REQUIREMENTS

Input Voltage : 12V DC +/- 10% Input Current : 0.5A

PHYSICAL SPECIFICATIONS

LED Indicators : 1 x Power Bi-color LED (Green/Red) 1 x Ethernet Link/Activity Status LED (Green) 1 x DSL Link Status LED (Green) External Connectors : 1 x RJ-11 Telephone socket for ADSL line 1 x RJ45 for 10/100Base-T Ethernet (AutoMDI/MDIX) 1 x DC Jack for Power Input 1 x Factory Default Reset Button 1 x On/Off Push Button Switch (Population Option) Measurements : Dimension : 105 (L) x 105 (W) x 30 (H) mm Weight : Approx. 250g

REGULATORY APPROVALS (pending)

US : FCC Part 15/68, UL 3rd Edition Asia Pacific /Europe : CE (EN55022:98/EN55024: 98), IEC 60950

ENVIRONMENTAL

TEMPERATURE Operating : 0o to 40 o C 32 o to 104 o F Non-Operating : -25 o to 70 o C -13 o to 158 o F HUMIDITY Operating : 30% to 80% Relative Humidity (Non-Condensing) Non-Operating : 30% to 95% Relative Humidity (Non-Condensing)

Source: Aztech.com