Aztech DSL1000ER

ADSL2/2+ 4 Port Managed Switch Router

The Aztech DSL1000ER ADSL2+ 4 Port Managed Switch Router uses complete Broadcom solution that fully complies with ADSL2/ADSL2+ standard.

Targeted at the residential and SOHO users that desires high quality triple play services, it is the ideal solution to provide secured Wired connectivity via a ADSL2+ built in modem, Routing functionality for multi-user sharing, double-layer NAT/SPI firewall, 4 port 10/100 AutoMDI/MDIx Managed Switch for video application QoS.

Aztech DSL1000ER is TR-069 compliant. TR-069 is a DSL forum technical specification report that defines the remote control/configuration of CPE from ACS (Auto Configuration Server), TR-069 is also well-known as "CPE WAN Management Protocol". The benefits of TR-069 include, remote management, auto-configuration, dynamic service activation, as well as saving cost on customer support and logistics.

Security is provided via a double Stateful Packet Inspection and NAT based firewall. Multiple session VPN Pass-through and DMZ support provide additional security support for telecommuters as well as allow flexibility while maintaining security against malicious hackers. Choices of Dynamic DNS server give users the flexibility of hosting a web or an FTP server with various domain names.

With Universal Plug and Play support, home networking becomes a breeze for everyone in the family. Multi Port Range/Popular Application Forwarding makes it even easier to select which application you want your network to allow while ensuring your security at the same time.


ADSL Support
ANSI T1.413 issue 2, ITU-T G.992.1 (G.dmt) and G.992.2 (G.lite) compliant
G.992.3 (ADSL2), G.992.5 (ADSL2+), RE-ADSL Ready
ATM Layer with Traffic shaping QoS Support (UBR, CBR, VBR-rt, VBR-nrt)
AAL ATM Attributes - AAL5
Multiple PVC up to 8 support
Spectral compatibility with POTS
F4 & F5 OAM Loopback/Send and Receive
Annex A, Annex B, Annex M Support
TR-067 pass
TR-068 compliant
Encapsulation Support
RFC2684 Bridge and Routed LLC and VC Mux support (for ADSL only)
RFC2364 PPPoA Client support (for ADSL only)
RFC2516 PPPoE Client support
RFC2225/RFC1577 Classical IP Support (for ADSL only)
Transparent Bridge Support

PAP/CHAP/MS-CHAP for Password Authentication Support

Network Support
Static IP, Dynamic RIP v1/v2 routing support
IP/TCP/UDP/ICMP/ARP Application Support
Network Address Translation (NAT)
PVC to VLAN Mapping
Port Forwarding/Triggering
Easy setup of Port Forwarding rules for popular Games/Application
NAT Application Level Gateway for popular applications
DHCP Server/Relay/client
DNS Relay Agent
DMZ support

SIP ALG (Application Layer Gateway) support

Multiple Sessions IP Sec and PPTP/L2TP VPN pass through support
PPP Always on
PPP Dial on Demand with configurable timeout
Universal Plug and Play Support
DDNS (Dynamic DNS) Support
IGMP Proxy Support (IGMP v1 and v2)
SNTP Support

QoS Support (DSCP, TOS), including Diffserv, IEEE802.1p - Priority bit,IEEE802.1q - VLAN triggering

PPP/DHCP Auto Detection (Future release)

TR-069 Compliant

Management Support
Web Based HTTP management GUI
TFTP/FTP Support for Firmware Upgrade
Web Based Firmware Upgrade (Local)
Soft Factory Reset Button via Web GUI
Diagnostic Test (DSL, OAM (ADSL), Network (ADSL), Ping Test)
TR068 - WAN Access
Telnet with CLI (Read and Write) configuration
Syslog Support

Firmware upgrade-able for future feature enhancement

Quick firmware upgrade button (depopulation option)

TR-069 Compliant

SNMP v1 and v2

SSH Support

Security Support
NAT for basic Firewall support
Packet Filtering Firewall Support
Stateful Packet Inspection Support
Protection against Denial of Service attacks

Password Authentication to Modem

URL filtering/ Parental Control (Option)

Real-Time Attack and Alert Logs (Option)

Broadcom BCM6338 (Processor), BCM 6301(5V line driver)
Broadcom BCM5325E (5-Port Ethernet Managed Switch)
4 MB Flash ROM (2MB population option without TR-069 support)
16 MB SDRAM (8MB population option without TR-069 support)
Dying Gasp Support (Population Option)
ITU K.21 Support
GDT Support (Population Option)
For Ethernet

OS Independent

Input Voltage : 12V DC +/- 10%
Input Current : 1A
LED Indicators :

1 x "Power" LED (Green and Red LED)
4 x Ethernet Link Status (Green) LED
1 x "DSL" Status (Green LED)
1 x "Internet" Status (Green and Red) LED
External Connectors :

1 x RJ-11 Telephone socket for DSL line
4 x RJ45 for 10/100Base-T Ethernet (AutoMDI/MDIx)
1 x DC Jack for Power Input
1 x Factory Default Reset Button
1 x On/Off Push Button Switch
Measurements :

Dimension : 156 (L) x 135 (W) x 34 (H) mm
Weight : Approx. 250g
US : FCC Part 15/68, UL 3 rd Edition (option)
Asia Pacific /Europe : CE, IEC 60950

Operating :
0o to 50 o C
32 o to 104 o F

Non-Operating :
-25 o to 70 o C
-13 o to 158 o F

Operating : 10% to 85% Relative Humidity (Non-Condensing)
Non-Operating : 5% to 95% Relative Humidity (Non-Condensing)



Post a Comment

Related Posts Plugin for WordPress, Blogger...