Aztech DSL1000EW

ADSL2/2+ Wireless LAN 802.11b/g 4 Port Managed Switch Router

The Aztech DSL1000EW ADSL2+ Wireless LAN 802.11b/g 4 Port Managed Switch Router uses complete Broadcom solution with wireless on board design that fully complies with ADSL2/ADSL2+ standard.

Targeted at the residential and SOHO users that desires high quality triple play services, it is the ideal solution to provide a 6 in 1 device for both Wired and Wireless connectivity via a ADSL2+ built in modem, Routing functionality for multi-user sharing, double-layer NAT/SPI firewall, 4 port 10/100 AutoMDI/MDIx Managed Switch for video application QoS, high speed IEEE802.11b/g Wireless LAN Access point.

Aztech DSL1000EW is TR-069 compliant. TR-069 is a DSL forum technical specification report that defines the remote control/configuration of CPE from ACS (Auto Configuration Server), TR-069 is also well-known as "CPE WAN Management Protocol". The benefits of TR-069 include, remote management, auto-configuration, dynamic service activation, as well as saving cost on customer support and logistics.

Security is provided via a double Stateful Packet Inspection and NAT based firewall. Hardware accelerated AES/WEP/WPA/WPA2 based encryption/MAC Address Filtering for Wireless links. Multiple session VPN Pass-through and DMZ support provide additional security support for telecommuters as well as allow flexibility while maintaining security against malicious hackers. Choices of Dynamic DNS server give users the flexibility of hosting a web or an FTP server with various domain names.

With Universal Plug and Play support, home networking becomes a breeze for everyone in the family. Multi Port Range/Popular Application Forwarding makes it even easier to select which application you want your network to allow while ensuring your security at the same time.


ADSL Support
ANSI T1.413 issue 2, ITU-T G.992.1 (G.dmt) and G.992.2 (G.lite) compliant
bullet01 G.992.3 (ADSL2), G.992.5 (ADSL2+), RE-ADSL Ready
bullet01 ATM Layer with Traffic shaping QoS Support (UBR, CBR, VBR-rt, VBR-nrt)
bullet01 AAL ATM Attributes - AAL5
bullet01 Multiple PVC up to 16 support
bullet01 Spectral compatibility with POTS
bullet01 F4 & F5 OAM Loopback/Send and Receive
bullet01 Annex A, Annex B, Annex M Support
bullet01 TR-067 pass
bullet01 TR-068 compliant
Encapsulation Support
RFC2684 Bridge and Routed LLC and VC Mux support (for ADSL only)
RFC2364 PPPoA Client support (for ADSL only)
RFC2516 PPPoE Client support
RFC2225/RFC1577 Classical IP Support (for ADSL only)
Transparent Bridge Support
bullet01 PAP/CHAP/MS-CHAP for Password Authentication Support
Network Support
Static IP, Dynamic RIP v1/v2 routing support
IP/TCP/UDP/ICMP/ARP Application Support
Network Address Translation (NAT)
PVC to VLAN Mapping
Port Forwarding/Triggering
Easy setup of Port Forwarding rules for popular Games/Application
NAT Application Level Gateway for popular applications
DHCP Server/Relay/client
DNS Relay Agent
DMZ support
SIP ALG (Application Layer Gateway) support
Multiple Sessions IP Sec and PPTP/L2TP VPN pass through support
PPP Always on
bullet01 PPP Dial on Demand with configurable timeout
bullet01 Universal Plug and Play Support
bullet01 DDNS (Dynamic DNS) Support
bullet01 IGMP Proxy Support (IGMP v1 and v2)
bullet01 SNTP Support

QoS Support (DSCP, TOS), including Diffserv, IEEE802.1p - Priority bit,IEEE802.1q - VLAN triggering

bullet01 PPP/DHCP Auto Detection (Future release)
bullet01 TR-069 Compliant
WLAN Support
Wireless on Motherboard (WOMBO)
IEEE 802.11, 802.11b and 802.11g compliant
Supports 802.11b, 802.11g simultaneously
Transmit output power up to 20dBm (standard)

Conforms to Wireless Ethernet Compatibility Alliance (WECA) Wireless Fidelity(Wi-Fi tm ) Standard

Support seamless WLAN roaming
Frequency Band :
- 2412 MHz - 2462 MHz (North America/FCC)
- 2412 MHz - 2472 MHz (ETSI/Europe)
- 2412 MHz - 2484 MHz (Japan)
- 2457 MHz - 2472 MHz (France)
- 2457 MHz - 2462 MHz (Spain)
Support Direct Sequence Spread Spectrum (DSSS) technology
Modulation : OFDM with BPSK, QPSK, 16QAM, 64QAM, DBPSK, DQPSK, CCK
Wireless Media Access Protocol- CSMA/CA with ACK
64/128 WEP Encryption
WPA/WPA2 Support
bullet01 MAC filtering Support
bullet01 Dynamic Rate Scaling from 54, 48, 36, 24, 12, 11, 9, 6, 5.5, 2, 1 Mb/s
bullet01 Operating Range of >300 Meters (Open Air)
bullet01 WDS Support (Wireless Distribution System)
bullet01 Multiple SSID Support (2)
Management Support
Web Based HTTP management GUI
TFTP/FTP Support for Firmware Upgrade
Web Based Firmware Upgrade (Local)
Soft Factory Reset Button via Web GUI
Diagnostic Test (DSL, OAM (ADSL), Network (ADSL), Ping Test)
TR068 - WAN Access
Telnet with CLI (Read and Write) configuration
Syslog Support
bullet01 Firmware upgrade-able for future feature enhancement
bullet01 Quick firmware upgrade button (depopulation option)
bullet01 TR-069 Compliant
bullet01 SNMP v1 and v2
bullet01 SSH Support
Security Support
NAT for basic Firewall support
Packet Filtering Firewall Support
Stateful Packet Inspection Support
Protection against Denial of Service attacks
Password Authentication to Modem
bullet01 URL filtering/ Parental Control (Option)
bullet01 Real-Time Attack and Alert Logs (Option)
Broadcom BCM6338 (Processor), BCM 6301 (5V line driver)
Broadcom BCM5325E (5-Port Ethernet Managed Switch)
Broadcom BCM4318 (Wireless Mac/Baseband/Radio)
bullet01 4 MB Flash ROM
bullet01 16 MB SDRAM
bullet01 Dying Gasp Support (Population Option)
bullet01 ITU K.21 Support
bullet01 GDT Support (Population Option)
Platform support
For Ethernet and Wireless LAN
OS Independent
Power Requirements
Input Voltage : 12V DC +/- 10%
Input Current : 1.0A
Physical Specifications
LED Indicators :
- 1 x "Power" LED (Green and Red LED)
- 4 x Ethernet Link Status (Green) LED
- 1 x "Wireless" LAN Link/Activity Status (Green) LED
- 1 x "DSL" Status (Green) LED
- 1 x "Internet" Status (Green and Red) LED
External Connectors :
- 1 x RJ-11 Telephone socket for DSL line
- 4 x RJ45 for 10/100Base-T Ethernet (AutoMDI/MDIx)
- 1 x DC Jack for Power Input
- 1 x Factory Default Reset Button
- 1 x On/Off Power Switch
- 1 x fixed 3dBi 180 degree rotatable antenna
Measurements :
- Dimension : 156 (L) x 135 (W) x 34 (H) mm
- Weight : Approx. 250 g
Regulatory Approvals (Pending)
bullet01 US : FCC Part 15/68, UL 3 rd Edition (option)
bullet01 Asia Pacific /Europe : CE, IEC 60950

Operating :

0o to 50 o C
32 o to 104 o F

Non-Operating :

-25 o to 70 o C
-13 o to 158 o F


Operating :

10% to 85% Relative Humidity (Non-Condensing)

Non-Operating :

5% to 95% Relative Humidity (Non-Condensing)



Post a Comment

Related Posts Plugin for WordPress, Blogger...