Showing posts with label TP-Link Modem Router WiFi. Show all posts
Showing posts with label TP-Link Modem Router WiFi. Show all posts

TD-8816 Hardware Installation

Hardware Installation Tutorial Guide. Click here

2.1 The Front Panel


Figure 2-1

The LEDs locate on the front panel, which indicate the device’s working status. For details, please refer to LED Explanation.

LED Explanation:



2.2 The Back Panel


  • On/OFF: The switch for the power.
  • POWER: The Power plug is where you will connect the power adapter.
  • RESET: There are two ways to reset the Router's factory defaults.
Method one: With the Router powered on, use a pin to press and hold the Reset button (about 5 seconds) until the SYS LED becomes quick-flash from slow-flash. And then release the button and wait the router to reboot to its factory default settings.
Method two: Restore the default setting from “Maintenance-SysRestart” of the Router's Web-based Utility.
  • LAN: Through the port, you can connect the Router to your PC or the other Ethernet network devices.
  • LINE: Through the port, you can connect the Router with the telephone.
2.3 Installation Environment
  • The Product should not be located where it will be exposed to moisture or excessive heat.
  • Place the Router in a location where it can be connected to the various devices as well as to a power source.
  • Make sure the cables and power cord are placed safely out of the way so they do not create a tripping hazard.
  • The Router can be placed on a shelf or desktop.
2.4 Connecting the Router

Before installing the device, please make sure your broadband service provided by your ISP is available. If there is any problem, please contact your ISP. You need to connect the device to the phone jack, the power outlet, and your computer or network. Before cable connection, cut off the power supply and keep your hands dry. You can follow the steps below to install it.

Step 1: Connect the ADSL Line.

Method one: Plug one end of the twisted-pair ADSL cable into the ADSL LINE port on the rear panel of TD-8816, and insert the other end into the wall socket.
Method two: You can use a separate splitter. External splitter can divide the data and voice, and then you can access the Internet and make calls at the same time.
The external splitter has three ports:
LINE: Connect to the wall jack
PHONE: Connect to the phone sets
MODEM: Connect to the ADSL LINE port of TD-8816 Plug one end of the twisted-pair ADSL cable into the ADSL LINE port on the rear panel of TD-8816. Connect the other end to the MODEM port of the external splitter.

Step 2: Connect the Ethernet cable. Attach one end of a network cable to your computer’s Ethernet port or a regular hub/switch port, and the other end to the LAN port on the TD-8816.

Step 3: Attach the power adapter. Connect the AC power adapter to the POWER connector on the rear of the device and plug in the adapter to a wall outlet or power extension.

Step 4: Turn on the TD-8816 and power on the computers and LAN devices.


TD-8816 Hardware Installation Tutorial Guide. Click here
TD-8816 Quick Start Guide. Click here

Quick Installation Guide

Configure PC

After you directly connect your PC to the TD-8816 or connect your adapter to a Hub/Switch which has connected to the Router, you need to configure your PC’s IP address. Follow the steps below to configure it.

Step 1: Click the Start menu on your desktop, right click My Network Places, and then select Properties (shown in Figure 3-1).


Figure 3-1

Step 2: Right click Local Area Connection (LAN), and then select Properties.


Figure 3-2

Step 3: Select General tab, highlight Internet Protocol (TCP/IP), and then click the Properties button.


Figure 3-3

Step 4: Configure the IP address as Figure 3-4 shows. After that, click OK.


Figure 3-4

Note: You can configure the PC to get an IP address automatically, select “Obtain an IP address automatically” and “Obtain DNS server address automatically” in the screen above.

Now, you can run the Ping command in the command prompt to verify the network connection. Please click the Start menu on your desktop, select run tab, type cmd in the field, and then type ping 192.168.1.1 on the next screen, and then press Enter. If the result displayed is similar to the screen below, the connection between your PC and the Router has been established.


Figure 3-5

If the result displayed is similar to the screen shown below, it means that your PC has not connected to the TP-Link TD-8816 ADSL2/2+ Modem/Bridge/Router.


Figure 3-6

You can check it follow the steps below:

1) Is the connection between your PC and the TP-Link TD-8816 ADSL2/2+ Modem/Bridge/Router correct? The LEDs of LAN port which you link to the device and the LEDs on your PC's network interface controller (NIC) card or adapter should be lit.

2) Is the TCP/IP configuration for your PC correct? If the TP-Link TD-8816 ADSL2/2+ Modem/Bridge/Router's IP address is 192.168.1.1, your PC's IP address must be within the range of 192.168.1.2 ~ 192.168.1.254.

3) Check if the physical wiring connection between your PC and your device, the TP-Link TD-8816 ADSL2/2+ Modem/Bridge/Router is properly plug to the port both end of the LAN cable.

Click here To learned on how-to do-it-yourself troubleshooting the TP-Link TD-8816 ADSL2/2+.
Click here To configure Streamyx DSL Broadband Internet connection.

TP-Link TD-8840(T)TB

ADSL2+ Modem Router

Description:

The TP-Link ADSL2+ Modem Router (TD-8840T) is a 2-in-1 device that combines the functions of a DSL modem and 4-port 10/100 Ethernet router. It supports the latest ADSL2/2+ standards to provide higher performance (up to 24Mbps downstream) and longer reach from your Internet Service Provider’s (ISP) Digital Subscriber Line Access Multiplexer (DSLAM). You can also create a wired network to share your high-speed Internet connection, documents, photos, music, videos, and printers.

The TD-8840T includes a built-in QoS engine that helps prioritize Internet traffic to enable smooth Internet phone calls (VoIP) and lag-free online gaming. In addition, this device includes Dual Active Firewalls (Packet filtering and NAT) to help protect your network from potential attacks from across the Internet. Setting up the TD-8840T is simple since it automatically detects your DSL settings to quickly establish a connection to the Internet.

The TD-8840T also supports TR-069 which automatically updates the firmware and other settings when they become available from your ISP. Featuring high ADSL performance, various QoS policy, easy-to-use, TD-8840T is your best choice to access to the internet.

The device comes with a CD with an Easy Setup Assistant that helps you step by step to configure your Internet connection. This feature allows even novice users to setup the router products without sacrificing any key features, just play the AUTO-RUN CD bundled to have your network set up quickly & hassle-free.

Features:
  • Access a high-speed DSL Internet connection
  • Up to 24Mbps downstream speed
  • Supports Annex M, which can double upstream data rates
  • Built-in switch connects four local PCs directly, and daisy-chain out to more hubs and switches as your network grows
  • QoS prioritization based on ToS, DSCP, service type or 802.1p
  • Triple Active Firewalls: SPI, NAT and Packet Filter
  • Supports DHCP, Universal Plug-and-Play (UPnP), and includes a user-friendly Setup Wizard which takes you through configuring your network, step by step
  • Administer and Upgrade the Router Remotely over the Internet

Software Specification
ADSL Features
Full-rate ANSI T1.413 Issue 2
ITU-T G.992.1 (G.dmt)
ITU-T G.992.2 (G.lite)
ITU-T G.994.1 (G.hs)
ITU-T G.992.3 (G.dmt.bis)
ITU-T G.992.5
Max 6 kilometers
Data Rates
Downstream: Up to 24Mbps
Upstream: Up to 3.5Mbps (With Annex M enabled)
ATM Features
UNI 3.1/4.0,ATM Adaptation Layer Type 5-AAL5
Multiprotocol encapsulation over ATM (RFC 1483)
UBR, CBR, VBR-rt, VBR-nrt
Supports 8PVCs
PPP Features
PPP over ATM (RFC 2364)
PPP over Ethernet (RFC 2516)
Switching Features
IGMP snooping
IGMP multicast
Port VLAN
Tag VLAN
IEEE 802.1d transparent learning bridging
Routing Features
Classical IP and ARP over ATM (RFC 1577/2225), MER, RIP V1/V2
Static routing, IP, TCP, UDP, ARP
NAT, NAPT, DNS, DDNS, DHCP Server
UPnP, Virtual Server, DMZ
SIP, H323 ALG
Security
Stateful Packet Inspection (SPI)
NAT
Packet Filter
VPN Pass Through
IPSec/PPTP/L2TP Pass-through
QoS
IP Type of service(ToS)
802.1p
Device Management
HTTP, TELNET, Console
Administration and operation software (firmware) upgradable locally by WEB, TFTP, FTP, Console
SNMP V1/V2
CWMP(TR-069)

Hardware Specification
Ports
4 10/100M LAN Ports(RJ45)
1 Line Port(RJ11)
LED Indicators
Power, ADSL, Internet, LAN1~4
Dimensions (W*D*H)
6.9*4.7*1.1 in.(174*120*28.8mm)
Environment
Operating Temperature: 0℃~40℃ (32℉~104℉)
Storage Temperature: -40℃~70℃ (-40℉~158℉)
Operating Humidity: 10%~90% non-condensing
Storage Humidity: 5%~90% non-condensing

Source: TP-Link.com

TP-Link TD-W8960N

300Mbps Wireless N ADSL2+ Modem Router

Description:

3-IN-1 DEVICE
The TP-LINK Wireless N ADSL2+ Modem Router (TD-W8960N) is an All-in-One device that combines the functions of a high speed DSL modem, a 4-Port 10/100Mbps NAT router and a wireless N access point. The TD-W8960N is designed to give you a one-stop solution to acquiring and sharing high speed Internet access over a wired/wireless network.

ACCESS HIGH-SPEED INTERNET
Supporting the latest ADSL standards to provide higher performance (up to 24Mbps downstream and 3.5Mbps upstream) and longer reach from your Internet Service Provider (ISP) Digital Subscriber Line Access Multiplexer (DSLAM), the TD-W8960N brings with it much higher speed than a dial-up connection without tying up the phone line. This device also supports TR-069, which automatically updates the firmware and other settings when they become available from your ISP.

SHARING INTERNET THROUGH WIRELESS
Complies with the IEEE 802.11n standard, users can create a wireless network and get up to 15X the speed and 5X the range of conventional 11g products. Now you can share your high-speed DSL Internet connection, photos, music, videos, printers, Network Attached Storage (NAS) and even the bandwidth consuming applications like HD video streaming wirelessly which can not be accommodated by 11g products, from anywhere in your entire home or even the yard ! The TD-W8960N supports QoS to enable smooth VoIP/IPTV streaming and lag-free online gaming.

In addition, this device includes Dual Active Firewalls (SPI and NAT) to help protect your network from potential attacks from across the Internet. To prevent unauthorized wireless access into your network, the device supports the latest encryption including WEP, WPA and WPA2.

QUICK SECURE SETUP
QSS or Quick Security Setup is a handy feature that allows users to almost instantly setup their security simply by pressing the QSS button on the wireless router or entering the PIN Code in the net card, it automatically establishes a WPA2 secure connection, instantly protecting your network. With just one click of the QSS button, it automatically establishes a WPA2 secure connection for solid security in under a minute.

KEEP DATA SECURE
Featuring IPSec VPN function, TD-W8960N allows off-site or traveling users to securely access the company´s central network through the Internet. VPN is short for Virtual Private Network, which creats encrypted tunnels through the Internet between the company´s private network and the remote or traveling users off-site. These tunnels are using virtual connections instead of the dedicated, real-world connection such as leased line. Featuring IPSec VPN function, the TP-LINK TD-W8960N is no longer just a wireless ADSL modem router, it can work as a VPN gateway, which supports up to 10 IPSec VPN tunnels simutaneously. As such, users can allow for complete data privacy for the access and exchange of user´s most sensitive data from home to corporate network or between remote branch offices safely.

EASY TO USE
The device comes with a CD with an Easy Setup Assistant that helps you step by step to complete your Internet connection, wireless network settings and security configurations. This feature allows even novice users to setup the router products without sacrificing any key features, just play the AUTO-RUN CD bundled to have your network set up quickly & hassle-free.

Features:
  • High speed DSL modem, NAT router and wireless access point in one device provides one-stop networking solution
  • Wireless N speed up to 300Mbps makes it ideal for bandwidth consuming or interruption sensitive applications like online gaming , VoIP and even the HD video streaming
  • Support up to 10 IPSec VPN tunnels simultaneously
  • QoS enables smooth VoIP/IPTV streaming and lag-free online gaming
  • WPA/WPA2 encryptions provide your network with active defense against security threats
  • SPI and NAT firewall protects end-user devices from potential attacks across the Internet
  • Easy Setup Assistant provides quick & hassle free installation
  • Supports IP address filtering, MAC address filtering and parental control ,DHCP, UPnP
  • Port-mapping binds specific LAN ports and PVCs for differential services
  • Annex M allows for doubling the upstream data rate to 3.5Mbps
  • Auto-reconnect keeps you online indefinitely

Software Specification
ADSL Features
Full-rate ANSI T1.413 Issue 2
ITU-T G.992.1 (G.dmt)
ITU-T G.992.2 (G.lite)
ITU-T G.994.1 (G.hs)
ITU-T G.992.3 (G.lite.bis)
ITU-T G.992.5
Max 6 kilometers
Data Rates
Downstream: Up to 24Mbps
Upstream: Up to 3.5Mbps (With Annex M enabled)
ATM Features
UNI 3.1,ATM Adaptation Layer Type 5-AAL5
Multiprotocol encapsulation over ATM (RFC 1483)
UBR, CBR, VBR-rt, VBR-nrt
Supports 8PVCs
PPP Features
PPP over ATM (RFC 2364)
PPP over Ethernet (RFC 2516)
Switching Features
IGMP snooping
IGMP multicast
IEEE 802.1d transparent learning bridging
Routing Features
Classical IP and ARP over ATM (RFC 1577/2225), MER, RIP V1/V2
Static Routing, IP, TCP, UDP, ARP
NAT, NAPT, DNS, DDNS, DHCP Server
UPnP, Virtual Server, DMZ, Port Trigger
SIP, H323 ALG
Wireless Features
Complies with IEEE802.11n, IEEE 802.11g, IEEE802.11b
11n: Up to 300Mbps(dynamic)
Provides WPA/WPA2 and WPA-PSK/WPA2-PSK authentication
Provides 64/128bit WEP encryption security and wireless LAN ACL (Access Control List)
Max wireless transmit power: 19dbm
Antenna power: 3dbi
Frequency Range:2.4~2.4835GHz
Security
NAT
IP filterling
MAC filtering
Parental control
IPSec VPN
Support up to 10 IPSec VPN tunnels
VPN Pass Through
IPSec/PPTP/L2TP Pass-through
QoS
IP Type of service(ToS)
802.1p
Device Management
HTTP, Console
Administration and operation software (firmware) upgradable locally by web(HTTP), console(TFTP)
CWMP(TR-069)
Hardware Specification
Ports
4 10/100M LAN Ports(RJ45)
1 Line Port(RJ11)
LED Indicators
Power, Internet, ADSL, WLAN, LAN1~4,QSS
Dimensions (W*D*H)
7.9*5.5*1.1 in.(200*140*28 mm)
Environment
Operating Temperature: 0oC~40oC (32oF~104oF)
Storage Temperature: -40oC~70 oC(-40oF~158oF)
Operating Humidity: 10%~90% non-condensing
Storage Humidity: 5%~90% non-condensing


Source: TP-Link.com

TP_Link TD-W8920G

108Mbps Super G & eXtended Range Wireless ADSL2+ Modem Router

Description:

TD-W8920G 108M Wireless ADSL2+ Modem Router is designed to provide a simple and cost-effective ADSL Internet connection for a private Ethernet or 802.11g/802.11b wireless network.

The Router is easy to use. The TD-W8920G connects to an Ethernet LAN or computers via standard Ethernet ports. The ADSL connection is made using ordinary telephone line with standard connectors. Multiple workstations can be networked and connected to the Internet using a single Wide Area Network (WAN) interface and single global IP address. The advanced security enhancements, IP Filtering and MAC Filtering can help protect your network from potentially devastating intrusions by malicious agents from the outside of your network. Parental Control provides flexible access control so that parents or network administrators can establish restricted access policies for children or staff.

The Router is easy to install and manage. Quick Setup of the Web-based Utility is supplied and friendly help messages are provided for every step. Network and Router management is done through the Web-based Utility which can be accessed through local Ethernet using any Web browser. Remote management is provided so that you may configure the Router through WAN port by the use of any Web browser.

ADSL
The TD- W8920G 108M Wireless ADSL2+ Modem Router utilizes integrated ADSL2+ transceiver and high speed MIPS CPU. The Router supports full-rate ADSL2+ connectivity conforming to the ITU and ANSI specifications.
In addition to the basic DMT physical layer functions, the ADSL2+ PHY supports dual latency ADSL2+ framing (fast and interleaved) and the I.432 ATM Physical Layer.
The TD- W8920G 108M Wireless ADSL2+ Modem Router is a complete plug-and-play solution. The Router integrates 4-port switch, firewall and NAT Router. Its design is dedicated to Small Office/Home Office (SOHO) wireless network solutions.

Wireless
In the most attentive wireless security, the Router provides multiple protection measures. It can be set to turn off the wireless network name (SSID) broadcast so that only stations that have the SSID can be connected. The Router provides wireless LAN 64/128/152-bit WEP encryption security, WPA/WPA2 and WPA-PSK/WPA2-PSK authentication, as well as TKIP/AES encryption security.

The Router complies with the IEEE 802.11g/b standards so that wireless data transfer rate is up to 108Mbps. It adopts Super G™ and eXtended Range™ WLAN transmission technology so that the transmission distance is 2-3 times of traditional IEEE 802.11g/b solutions, and the data transfer rate is up to 108Mbps. It is compatible with all IEEE 802.11g and IEEE 802.11b products.

The device comes with a CD with an Easy Setup Assistant that helps you step by step to complete your Internet connection, wireless network settings and security configurations. This feature allows even novice users to setup the router products without sacrificing any key features, just play the AUTO-RUN CD bundled to have your network set up quickly & hassle-free.

Features:
  • 3-in-1: ADSL2+ modem,4-port Ethernet router and wireless G access point
  • Adopts 2x to 3x eXtended Range™ and Super G™ wireless LAN transmission technology
  • Easily share ADSL connection with all office or home computers,wired or wirelessly
  • Built-in firewall supporting IP address filtering, MAC address filtering and parental control
  • Supports DHCP, Universal Plug-and-Play (UPnP), and includes a user-friendly Setup Wizard which takes you through configuring your network, step by step
  • Administer and Upgrade the Router Remotely over the Internet

ADSL Features
Full-rate ANSI T1.413 Issue 2
ITU-T G.992.1 (G.dmt)
ITU-T G.992.2 (G.lite)
ITU-T G.994.1 (G.hs)
ITU-T G.992.3 (G.dmt.bis)
ITU-T G.992.5
Max 6 kilometers
Data Rates
Downstream: Up to 24Mbps
Upstream: Up to 3.5Mbps (With Annex M enabled)
ATM Features
UNI 3.1,ATM Adaptation Layer Type 5-AAL5
Multiprotocol encapsulation over ATM (RFC 1483)
UBR, CBR, VBR-rt, VBR-nrt
Supports 8PVCs
PPP Features
PPP over ATM (RFC 2364)
PPP over Ethernet (RFC 2516)
Switching Features
IGMP snooping
IGMP multicast
IEEE 802.1d transparent learning bridging
Routing Features
Classical IP and ARP over ATM (RFC 1577/2225), MER, RIP V1/V2
Static routing, IP, TCP, UDP, ARP
NAT, NAPT, DNS, DDNS, DHCP Server
UPnP, Virtual Server, DMZ, Port Trigger
SIP, H323 ALG
Wireless Features
Complies with IEEE 802.11g, IEEE802.11b
11g: Up to 108Mbps
Provides WPA/WPA2 and WPA-PSK/WPA2-PSK authentication
Provides 64/128/152bit WEP encryption security and wireless LAN ACL (Access Control List)
Wireless operating range: Indoor up to100m, Outdoor up to 300m
wireless transmit power: 20dBm (max. EIRP)
Antenna power: 3dbi
Security
NAT
IP filterling
MAC filtering
Parental control
VPN Pass Through
IPSec/PPTP/L2TP Pass-through
QoS
IP Type of service(ToS)
802.1p
Device Management
HTTP, Console
Administration and operation software (firmware) upgradable locally by web(HTTP), console(TFTP)
CWMP(TR-069)

Hardware Specification
Ports
4 10/100M LAN Ports(RJ45)
1 Line Port(RJ11)
LED Indicators
Power, System, ADSL, WLAN, LAN1~4
Dimensions (W*D*H)
7.9*5.5*1.1 in.(200*140*28 mm)
Environment
Operating Temperature: 0?~40? (32?~104?)
Storage Temperature: -40?~70? (-40?~158?)
Operating Humidity: 10%~90% non-condensing
Storage Humidity: 5%~90% non-condensing

Source: TP-Link.com

TP_Link TD-W8910G

54Mbps Wireless ADSL2+ Modem Router

Description:

The TP-Link 54M Wireless ADSL2+ Modem Router TD-W8910G is a 3-in-1 device that combines the function of a high-speed DSL modem, wireless G access point, and 4-port Ethernet router. It supports the latest ADSL2/2+ standards to provide higher performance (up to 24Mbps downstream and 3.5Mbps upstream) and longer reach from your Internet Service Provider´ (ISP) Digital Subscriber Line Access Multiplexer (DSLAM).

With the TD-W8910G, you can create a wireless network to connect 802.11g/802.11b devices as well as a wired network to connect up to four 10/100 Ethernet devices.

The TD-W8910G includes a built-in QoS engine that helps prioritize Internet traffic to enable smooth Internet phone calls (VoIP) and lag-free online gaming. To prevent unauthorized wireless access into your network, the TD-W8910G supports the latest encryption including WEP, WPA, and WPA2.

Whether it is for a home or for a small office user, TD-W8910G is the ideal all-in-one broadband and wireless networking solution.

The device comes with a CD with an Easy Setup Assistant that helps you step by step to complete your Internet connection, wireless network settings and security configurations. This feature allows even novice users to setup the router products without sacrificing any key features, just play the AUTO-RUN CD bundled to have your network set up quickly & hassle-free.

Features:
  • 3-in-1: ADSL2+ modem,4-port Ethernet router and wireless G access point
  • Easily share ADSL connection with all office or home computers,wired or wirelessly
  • Built-in firewall supporting IP address filtering, MAC address filtering and parental control
  • Supports DHCP, Universal Plug-and-Play (UPnP), and includes a user-friendly Setup Wizard which takes you through configuring your network, step by step
  • Administer and Upgrade the Router Remotely over the Internet

Software Specification
ADSL Features
Full-rate ANSI T1.413 Issue 2
ITU-T G.992.1 (G.dmt)
ITU-T G.992.2 (G.lite)
ITU-T G.994.1 (G.hs)
ITU-T G.992.3 (G.dmt.bis)
ITU-T G.992.5
Max 6 kilometers
Data Rates
Downstream: Up to 24Mbps
Upstream: Up to 3.5Mbps (With Annex M enabled)
ATM Features
UNI 3.1,ATM Adaptation Layer Type 5-AAL5
Multiprotocol encapsulation over ATM (RFC 1483)
UBR, CBR, VBR-rt, VBR-nrt
Supports 8PVCs
PPP Features
PPP over ATM (RFC 2364)
PPP over Ethernet (RFC 2516)
Switching Features
IGMP snooping
IGMP multicast
IEEE 802.1d transparent learning bridging
Routing Features
Classical IP and ARP over ATM (RFC 1577/2225), MER, RIP V1/V2
Static routing, IP, TCP, UDP, ARP
NAT, NAPT, DNS, DDNS, DHCP Server
UPnP, Virtual Server, DMZ, Port Trigger
SIP, H323 ALG
Wireless Features
Complies with IEEE 802.11g, IEEE802.11b
11g: Up to 54 Mbps(dynamic)
Provides WPA/WPA2 and WPA-PSK/WPA2-PSK authentication
Provides 64/128/152bit WEP encryption security and wireless LAN ACL (Access Control List)
Max wireless transmit power: 17dBm
Antenna Gain: 3dBi
Frequency Range:2.4-2.4835GHz
Security
NAT
IP filterling
MAC filtering
Parental control
VPN Pass Through
IPSec/PPTP/L2TP Pass-through
QoS
IP Type of service(ToS)
802.1p
Device Management
HTTP, Console
Administration and operation software (firmware) upgradable locally by web(HTTP), console(TFTP)
CWMP(TR-069)

Hardware Specification
Ports
4 10/100M LAN ports(RJ45)
1 Line port(RJ11)
LED Indicators
Power, System, ADSL, WLAN, LAN1~4
Dimensions (W*D*H)
7.9*5.5*1.1 in.(200*140*28 mm)
Environment
Operating Temperature: 0?~40? (32?~104?)
Storage Temperature: -40?~70? (-40?~158?)
Operating Humidity: 10%~90% non-condensing
Storage Humidity: 5%~90% non-condensing

Source: TP-Link.com

TP-Link TD-W8901G

54M Wireless ADSL2+ Modem Router

Description:

TD-W8901G 54M Wireless ADSL2+ Modem Router is designed to provide a simple and cost-effective ADSL Internet connection for a private Ethernet or 802.11g/802.11b wireless network.
The Router is easy to use. The TD-W8901G connects to an Ethernet LAN or computers via standard Ethernet ports. The ADSL connection is made using ordinary telephone line with standard connectors. Multiple workstations can be networked and connected to the Internet using a single Wide Area Network (WAN) interface and single global IP address. The advanced security enhancements, IP/MAC Filter, Application Filter and URL Filter can help to protect your network from potentially devastating intrusions by malicious agents from the outside of your network.
ADSL
The TD-W8901G supports full-rate ADSL2+ connectivity conforming to the ITU and ANSI specifications. In addition to the basic DMT physical layer functions, the ADSL2+ PHY supports dual latency ADSL2+ framing (fast and interleaved) and the I.432 ATM Physical Layer.
Wireless
In the most attentive wireless security, the Router provides multiple protection measures. It can be set to turn off the wireless network name (SSID) broadcast so that only stations that have the SSID can be connected. The Router provides wireless LAN 64/128-bit WEP encryption security, WPA-PSK/WPA2-PSK authentication, as well as TKIP/AES encryption security.

Features:
  • 3-in-1: ADSL2+ modem,4-port Ethernet router and wireless G access point
  • Easily share ADSL connection with all office or home computers,wired or wirelessly
  • Triple Active Firewalls: SPI, NAT and Packet Filter
  • QoS prioritization based on ToS, DSCP, service type or 802.1p
  • Supports DHCP, Universal Plug-and-Play (UPnP), and includes a user-friendly Setup Wizard which takes you through configuring your network, step by step
  • Administer and Upgrade the Router Remotely over the Internet

Software Specification
ADSL Features
Full-rate ANSI T1.413 Issue 2
ITU-T G.992.1 (G.dmt)
ITU-T G.992.2 (G.lite)
ITU-T G.994.1 (G.hs)
ITU-T G.992.3 (G.dmt.bis)
ITU-T G.992.5
Max 6 kilometers
Data Rates
Downstream: Up to 24Mbps
Upstream: Up to 3.5Mbps (With Annex M enabled)
ATM Features
UNI 3.1/4.0,ATM Adaptation Layer Type 5-AAL5
Multiprotocol encapsulation over ATM (RFC 1483)
UBR, CBR, VBR-rt, VBR-nrt
Supports 8PVCs
PPP Features
PPP over ATM (RFC 2364)
PPP over Ethernet (RFC 2516)
Switching Features
IGMP snooping
IGMP multicast
Port VLAN
Tag VLAN
IEEE 802.1d transparent learning bridging
Routing Features
Classical IP and ARP over ATM (RFC 1577/2225), MER, RIP V1/V2
Static routing, IP, TCP, UDP, ARP
NAT, NAPT, DNS, DDNS, DHCP Server
UPnP, Virtual Server, DMZ
SIP, H323 ALG
Wireless Features
Complies with IEEE 802.11g, IEEE802.11b
11g: Up to 54Mbps(dynamic)
Provides WPA/WPA2 and WPA-PSK/WPA2-PSK authentication and TKIP/AES encryption security
Provides 64/128-bit WEP encryption security and wireless LAN ACL (Access Control List)
Wireless operating range: Indoor up to100m, Outdoor up to 300m
wireless transmit power: 20dBm (max. EIRP)
Antenna power: 3dBi
Security
Stateful Packet Inspection (SPI)
NAT
Packet Filter
VPN Pass Through
IPSec/PPTP/L2TP Pass-through
QoS
IP Type of service(ToS)
802.1p
Device Management
HTTP, TELNET, Console
Administration and operation software (firmware) upgradable locally by WEB, TFTP, FTP, Console
SNMP V1/V2
CWMP(TR-069)

Hardware Specification
Ports
4 10/100M LAN Ports(RJ45)
1 Line Port(RJ11)
LED Indicators
Power ,ADSL ,Internet ,WLAN ,LAN(1-4)
Dimensions (W*D*H)
6.9*4.7*1.1 in.(174*120*28.8 mm)
Environment
Operating Temperature: 0℃~40℃ (32℉~104℉)
Storage Temperature: -40℃~70℃ (-40℉~158℉)
Operating Humidity: 10%~90% non-condensing
Storage Humidity: 5%~90% non-condensing

Source: TP-Link.com

TP-Link TD-W8101G

54Mbps Wireless ADSL2+ Modem Router

Description:

The TP-LINK 54M Wireless ADSL2+ Modem Router TD-W8101G is a 3-in-1 device that combines the function of a high-speed DSL modem, wireless G access point, and 1-port Ethernet router. It supports the latest ADSL2/2+ standards to provide higher performance (up to 24Mbps downstream) and longer reach from your Internet Service Provider´s (ISP) Digital Subscriber Line Access Multiplexer (DSLAM). The TD-W8101G includes a built-in QoS engine that helps prioritize Internet traffic to enable smooth Internet phone calls (VoIP) and lag-free online gaming. To prevent unauthorized wireless access into your network, the TD-W8101G supports the latest encryption including WEP, WPA, and WPA2. In addition, this device includes Dual Firewalls (SPI and NAT) to help protect your network from potential attacks across the Internet.

The TD-W8101G also supports TR-069 which automatically updates the firmware and other settings when they become available from your ISP. Whether it is for a home or for a small office user, the ADSL2/2+ Modem with 54M Wireless Router TDW8101G is the ideal all-in-one broadband and wireless networking solution.

Features:
  • 3-in-1: ADSL2+ modem,1-port Ethernet router and wireless G access point
  • Easily share ADSL connection with all office or home computers,wired or wirelessly
  • SPI and NAT Firewall protects LAN devices from potential attacks across the Internet
  • QoS prioritization based on ToS, DSCP, service type or 802.1p
  • Supports DHCP, Universal Plug-and-Play (UPnP), and includes a user-friendly Setup Wizard which takes you through configuring your network, step by step
  • Administer and Upgrade the Router Remotely over the Internet

Software Specification
ADSL Features
Full-rate ANSI T1.413 Issue 2
ITU-T G.992.1 (G.dmt)
ITU-T G.992.2 (G.lite)
ITU-T G.994.1 (G.hs)
ITU-T G.992.3 (G.dmt.bis)
ITU-T G.992.5
Max 6 kilometers
Data Rates
Downstream: Up to 24Mbps
Upstream: Up to 3.5Mbps (With Annex M enabled)
ATM Features
UNI 3.1/4.0, ATM Adaptation Layer Type 5-AAL5
Multiprotocol encapsulation over ATM (RFC 1483)
UBR, CBR, VBR-rt, VBR-nrt
Supports 8PVCs
PPP Features
PPP over ATM (RFC 2364)
PPP over Ethernet (RFC 2516)
Switching Features
IGMP snooping
IGMP multicast
Port VLAN
Tag VLAN
IEEE 802.1d transparent learning bridging
Routing Features
Classical IP and ARP over ATM (RFC 1577/2225), MER, RIP V1/V2
Static routing, IP, TCP, UDP, ARP
NAT, NAPT, DNS, DDNS, DHCP Server
UPnP, Virtual Server, DMZ
SIP, H323 ALG
Wireless Features
Complies with IEEE 802.11g, IEEE802.11b
11g: Up to 54Mbps(dynamic)
Provides WPA/WPA2 and WPA-PSK/WPA2-PSK authentication and TKIP/AES encryption security
Provides 64/128-bit WEP encryption security and wireless LAN ACL (Access Control List)
Wireless operating range: Indoor up to100m, Outdoor up to 300m
Max wireless transmit power: 13dBm
Antenna Gain:5dBi
Frequency Range:2.4-2.4835GHz
Security
Stateful Packet Inspection (SPI)
NAT
Packet Filter
VPN Pass Through
IPSec/PPTP/L2TP Pass-through
QoS
IP Type of service(ToS)
802.1p
Device Management
HTTP, TELNET, Console
Administration and operation software (firmware) upgradable locally by WEB, TFTP, FTP, Console
SNMP V1/V2
CWMP(TR-069)
Hardware Specification
Ports
1 10/100M LAN Port(RJ45)
1 Line Port(RJ11)
LED Indicators
Power, ADSL, Internet, WLAN, LAN
Dimensions (W*D*H)
6.9*4.7*1.1 in.(174*120*28.8 mm)
Environment
Operating Temperature: 0℃~40℃ (32℉~104℉)
Storage Temperature: -40℃~70℃ (-40℉~158℉)
Operating Humidity: 10%~90% non-condensing
Storage Humidity: 5%~90% non-condensing

Source: TP-Link.com

TP-Link TD-8840

ADSL2+ Modem Router

Description:

TD-8840 uses integrated ADSL2+ transceiver and a 256-MHz MIPS32 CPU.The AFE supports full-rate ADSL connectivity conforming to the ITU and ANSI specifications; MIPS32 CPU with MMU and 16-KB I-cache/8-KB D-cache is integrated into the device. In addition to the basic DMT physical layer functions, the ADSL PHY supports dual latency ADSL Framing (fast and interleaved) and the I.432 ATM Physical Layer.TD-8840 is a complete plug-and-play solution. With standard Ethernet interface, it can be directly connected to any 10M/100M Ethernet devices,supporting Auto MDI/MDIX.

The TD-8840 uses ADSL (Asymmetric Digital Subscriber Line) technology for Internet connection speeds of up to 455x faster than dial-up, while using a standard phone line. With a built-in 4-port switch, up to four network-ready computers or devices can simultaneously be connected to the TD-8840 for access to the Internet.

The device comes with a CD with an Easy Setup Assistant that helps you step by step to complete your Internet connection, wireless network settings and security configurations. This feature allows even novice users to setup the router products without sacrificing any key features, just play the AUTO-RUN CD bundled to have your network set up quickly & hassle-free.
TD-8840 not only use html (web mode through Ethernet port) to configure the MODEM but also use external utility software, too. With TP-LINK’s excellent design of circuit and high quality production, we guarantee ADSL MODEM a high performance, very good stability and easy to use.

Features:

  • Up to 24Mbps downstream speed
  • Supports Annex M, which can double upstream data rates
  • Built-in switch connects four local PCs directly, and daisy-chain out to more hubs and switches as your network grows
  • Built-in DHCP server
  • Administer and Upgrade the Router Remotely over the Internet
  • Easy Setup Assistant provides quick & hassle free installation

Software Specification
ADSL Features
Full-rate ANSI T1.413 Issue 2
ITU-T G.992.1 (G.dmt)
ITU-T G.992.2 (G.lite)
ITU-T G.994.1 (G.hs)
ITU-T G.992.3 (G.dmt.bis)
ITU-T G.992.5
Max 6 kilometers
Data Rates
Downstream: Up to 24Mbps
Upstream: Up to 3.5Mbps (With Annex M enabled)
ATM Features
UNI 3.1,ATM Adaptation Layer Type 5-AAL5
Multiprotocol encapsulation over ATM (RFC 1483)
UBR, CBR, VBR-rt, VBR-nrt
Supports 8PVCs
PPP Features
PPP over ATM (RFC 2364)
PPP over Ethernet (RFC 2516)
Switching Features
IEEE 802.1d transparent learning bridging
Routing Features
Classical IP and ARP over ATM (RFC 1577/2225), MER
Static routing, IP, TCP, UDP, ARP
NAT, NAPT, DNS, DDNS, DHCP Server
UPnP, Virtual Server, DMZ, Port Trigger
Security
NAT
IP filterling
MAC filtering
Parental control
VPN Pass Through
IPSec/PPTP/L2TP Pass-through
QoS
IP Type of service(ToS)
802.1p
Device Management
HTTP, TELNET, Console
Administration and operation software (firmware) upgradable locally by web(HTTP), console(TFTP)
SNMP

Ports
4 10/100M LAN Ports(RJ45)
1 Line Port(RJ11)
LED Indicators
Power?ADSL?Internet?LAN 1~4
Dimensions (W*D*H)
6.9*4.7*1.1 in.(174x 120x28.8mm)
Environment
Operating Temperature: 0?~40? (32?~104?)
Storage Temperature: -40?~70? (-40?~158?)
Operating Humidity: 10%~90% non-condensing
Storage Humidity: 5%~90% non-condensing

Source: TP-Link.com

TP-Link TD-8841

ADSL2+ Ethernet/USB Modem Router

Description:

TD-8841 uses integrated ADSL2+ transceiver and a 256-MHz MIPS32 CPU.The AFE supports full-rate ADSL connectivity conforming to the ITU and ANSI specifications; MIPS32 CPU with MMU and 16-KB I-cache/8-KB D-cache is integrated into the device. In addition to the basic DMT physical layer functions, the ADSL PHY supports dual latency ADSL Framing (fast and interleaved) and the I.432 ATM Physical Layer.TD-8841 is a complete plug-and-play solution. With standard Ethernet interface, it can be directly connected to any 10M/100M Ethernet devices,supporting Auto MDI/MDIX.

The TD-8841 uses ADSL (Asymmetric Digital Subscriber Line) technology for Internet connection speeds of up to 455x faster than dial-up, while using a standard phone line. With a built-in 4-port switch, up to four network-ready computers or devices can simultaneously be connected to the TD-8841 for access to the Internet.

The device comes with a CD with an Easy Setup Assistant that helps you step by step to complete your Internet connection, wireless network settings and security configurations. This feature allows even novice users to setup the router products without sacrificing any key features, just play the AUTO-RUN CD bundled to have your network set up quickly & hassle-free.

TD-8841 not only use html (web mode through Ethernet port) to configure the MODEM but also use external utility software, too. With TP-LINK’s excellent design of circuit and high quality production, we guarantee ADSL MODEM a high performance, very good stability and easy to use.

Features:

  • Access a high-speed DSL Internet connection
  • Up to 24Mbps downstream speed
  • Supports Annex M, which can double upstream data rates
  • Connect your computer using Ethernet or USB
  • Built-in switch connects four local PCs directly, and daisy-chain out to more hubs and switches as your network grows
  • Built-in DHCP server
  • Administer and Upgrade the Router Remotely over the Internet
  • Easy Setup Assistant provides quick & hassle free installation

Software Specification
ADSL Features
Full-rate ANSI T1.413 Issue 2
ITU-T G.992.1 (G.dmt)
ITU-T G.992.2 (G.lite)
ITU-T G.994.1 (G.hs)
ITU-T G.992.3 (G.dmt.bis)
ITU-T G.992.5
Max 6 kilometers
Data Rates
Downstream: Up to 24Mbps
Upstream: Up to 3.5Mbps (With Annex M enabled)
ATM Features
UNI 3.1,ATM Adaptation Layer Type 5-AAL5
Multiprotocol encapsulation over ATM (RFC 1483)
UBR, CBR, VBR-rt, VBR-nrt
Supports 8PVCs
PPP Features
PPP over ATM (RFC 2364)
PPP over Ethernet (RFC 2516)
Switching Features
IEEE 802.1d transparent learning bridging
Routing Features
Classical IP and ARP over ATM (RFC 1577/2225), MER
Static routing, IP, TCP, UDP, ARP
NAT, NAPT, DNS, DDNS, DHCP Server
UPnP, Virtual Server, DMZ, Port Trigger
Security
NAT
IP filterling
MAC filtering
Parental control
VPN Pass Through
IPSec/PPTP/L2TP Pass-through
QoS
IP Type of service(ToS)
802.1p
Device Management
HTTP, TELNET, Console
Administration and operation software (firmware) upgradable locally by web(HTTP), console(TFTP)
SNMP

Hardware Specification
Ports
4 10/100M LAN ports(RJ45)
1 Line port(RJ11)
1 USB 1.1 port
LED Indicators
Power?ADSL?Internet?USB?LAN 1~4
Dimensions (W*D*H)
6.9*4.7*1.1 in.(174x 120x28.8mm)
Environment
Operating Temperature: 0?~40? (32?~104?)
Storage Temperature: -40?~70? (-40?~158?)
Operating Humidity: 10%~90% non-condensing
Storage Humidity: 5%~90% non-condensing

Source: TP-Link.com


TP_Link TD-8841T

4-port ADSL2/2+ Ethernet/USB Modem Router

Description:

The TP-Link ADSL2+ Modem Router (TD-8841T) is a 2-in-1 device that combines the functions of a DSL modem and 4-port 10/100 Ethernet router. It offers both Ethernet and USB ports for flexible connectivity. It supports the latest ADSL2/2+ standards to provide higher performance (up to 24Mbps downstream) and longer reach from your Internet Service Provider’s (ISP) Digital Subscriber Line Access Multiplexer (DSLAM). You can also create a wired network to share your high-speed Internet connection, documents, photos, music, videos, and printers.

The TD-8841T includes a built-in QoS engine that helps prioritize Internet traffic to enable smooth Internet phone calls (VoIP) and lag-free online gaming. In addition, this device includes Dual Active Firewalls (SPI and NAT) to help protect your network from potential attacks from across the Internet.

The TD-8841T also supports TR-069 which automatically updates the firmware and other settings when they become available from your ISP.Featuring high ADSL performance, various QoS policy, easy-to-use, the TP-Link TD-8841T is a good choice to access to the internet.

The device comes with a CD with an Easy Setup Assistant that helps you step by step to configure your Internet connection. This feature allows even novice users to setup the router products without sacrificing any key features, just play the AUTO-RUN CD bundled to have your network set up quickly & hassle-free.

Features:
  • Access a high-speed DSL Internet connection
  • Up to 24Mbps downstream speed
  • Supports Annex M, which can double upstream data rates
  • Built-in switch connects four local PCs directly, and daisy-chain out to more hubs and switches as your network grows
  • QoS enables smooth VoIP, video streaming and lag-free online gaming
  • Dual Firewall protects LAN devices from potential attacks from across the Internet
  • Supports DHCP, Universal Plug-and-Play (UPnP), and includes a user-friendly Setup Wizard which takes you through configuring your network, step by step
  • Administer and Upgrade the Router remotely over the Internet

Software Specification
ADSL Features
Full-rate ANSI T1.413 Issue 2
ITU-T G.992.1 (G.dmt)
ITU-T G.992.2 (G.lite)
ITU-T G.994.1 (G.hs)
ITU-T G.992.3 (G.dmt.bis)
ITU-T G.992.5
Max 6 kilometers
Data Rates
Downstream: Up to 24Mbps
Upstream: Up to 3.5Mbps (With Annex M enabled)
ATM Features
UNI 3.1/4.0,ATM Adaptation Layer Type 5-AAL5
Multiprotocol encapsulation over ATM (RFC 1483)
UBR, CBR, VBR-rt, VBR-nrt
Supports 8PVCs
PPP Features
PPP over ATM (RFC 2364)
PPP over Ethernet (RFC 2516)
Switching Features
IGMP snooping
IGMP multicast
Port VLAN
Tag VLAN
IEEE 802.1d transparent learning bridging
Routing Features
Classical IP and ARP over ATM (RFC 1577/2225), MER, RIP V1/V2
Static routing, IP, TCP, UDP, ARP
NAT, NAPT, DNS, DDNS, DHCP Server
UPnP, Virtual Server, DMZ
SIP, H323 ALG
Security
Stateful Packet Inspection (SPI)
NAT
Packet Filter
VPN Pass Through
IPSec/PPTP/L2TP Pass-through
QoS
IP Type of service(ToS)
802.1p
Device Management
HTTP, TELNET, Console
Administration and operation software (firmware) upgradable locally by WEB, TFTP, FTP, Console
SNMP V1/V2
CWMP(TR-069)

Hardware Specification
Ports
4 10/100M LAN ports(RJ45 )
1 Line port(RJ11)
1 USB 1.1 port
LED Indicators
Power, ADSL, ACT, USB, LAN1~4
Dimensions (W*D*H)
7.9*5.5*1.1 in.(200*140*28 mm)
Environment
Operating Temperature: 0℃~40℃ (32℉~104℉)
Storage Temperature: -40℃~70℃ (-40℉~158℉)
Operating Humidity: 10%~90% non-condensing
Storage Humidity: 5%~90% non-condensing

Source: TP-Link.com

TP-Link TD-8810

External ADSL2+ Modem Router

Description:

TD-8810 uses integrated ADSL2+ transceiver and a 256-MHz MIPS32 CPU.The AFE supports full-rate ADSL connectivity conforming to the ITU and ANSI specifications; MIPS32 CPU with MMU and 16-KB I-cache/8-KB D-cache is integrated into the device. In addition to the basic DMT physical layer functions, the ADSL PHY supports dual latency ADSL Framing (fast and interleaved) and the I.432 ATM Physical Layer.TD-8810 is a complete plug-and-play solution. With standard Ethernet interface, it can be directly connected to any 10M/100M Ethernet devices,supporting Auto MDI/MDIX.

TD-8810 not only use html (web mode through Ethernet port) to configure the MODEM but also use external utility software, too. With TP-LINK´s excellent design of circuit and high quality production, we guarantee ADSL MODEM a high performance, very good stability and easy to use.

Features:

  • Access a high-speed DSL Internet connection
  • Up to 24Mbps downstream speed
  • Supports Annex M, which can double upstream data rates
  • Built-in DHCP server
  • Administer and Upgrade the Router Remotely over the Internet
  • Easily configure the router with the attached utility

Software Specification
ADSL Features
Full-rate ANSI T1.413 Issue 2
ITU-T G.992.1 (G.dmt)
ITU-T G.992.2 (G.lite)
ITU-T G.994.1 (G.hs)
ITU-T G.992.3 (G.dmt.bis)
ITU-T G.992.5
Max 6 kilometers
Data Rates
Downstream: Up to 24Mbps
Upstream: Up to 3.5Mbps (With Annex M enabled)
ATM Features
UNI 3.1,ATM Adaptation Layer Type 5-AAL5
Multiprotocol encapsulation over ATM (RFC 1483)
UBR, CBR, VBR-rt, VBR-nrt
Supports 8PVCs
PPP Features
PPP over ATM (RFC 2364)
PPP over Ethernet (RFC 2516)
Switching Features
IEEE 802.1d transparent learning bridging
Routing Features
Classical IP and ARP over ATM (RFC 1577/2225), MER
Static routing, IP, TCP, UDP, ARP
NAT, NAPT, DNS, DDNS, DHCP Server
UPnP, Virtual Server, DMZ, Port Trigger
Security
NAT
IP filterling
MAC filtering
Parental control
VPN Pass Through
IPSec/PPTP/L2TP Pass-through
QoS
IP Type of service(ToS)
802.1p
Device Management
HTTP, TELNET, Console
Administration and operation software (firmware) upgradable locally by web(HTTP), console(TFTP)
SNMP

Hardware Specification
Ports
1 10/100M LAN Port(RJ45)
1 Line Port(RJ11)
LED Indicators
LAN, ADSL, Alarm, ACT, Power
Dimensions (W*D*H)
6.5*4.3*1.1 in.(165*108*28 mm)
Environment
Operating Temperature: 0℃~40℃ (32℉~104℉)
Storage Temperature: -40℃~70℃ (-40℉~158℉)
Operating Humidity: 10%~90% non-condensing
Storage Humidity: 5%~90% non-condensing

Source: TP-Link.com

TP-Link TD-8811

External ADSL2+ Modem Router

Description:

TD-8811 uses integrated ADSL2+ transceiver and a 256-MHz MIPS32 CPU.The AFE supports full-rate ADSL connectivity conforming to the ITU and ANSI specifications; MIPS32 CPU with MMU and 16-KB I-cache/8-KB D-cache is integrated into the device. In addition to the basic DMT physical layer functions, the ADSL PHY supports dual latency ADSL Framing (fast and interleaved) and the I.432 ATM Physical Layer.TD-8811 is a complete plug-and-play solution. With standard Ethernet interface, it can be directly connected to any 10M/100M Ethernet devices,supporting Auto MDI/MDIX.

TD-8811 not only use html (web mode through Ethernet port) to configure the MODEM but also use external utility software, too. With TP-LINK´s excellent design of circuit and high quality production, we guarantee ADSL MODEM a high performance, very good stability and easy to use.

Features:
  • Access a high-speed DSL Internet connection
  • Up to 24Mbps downstream speed
  • Supports Annex M, which can double upstream data rates
  • Connect your computer using Ethernet or USB
  • Built-in DHCP server
  • Administer and Upgrade the Router Remotely over the Internet
  • Easily configure the router with the attached utility

Software Specification
ADSL Features
Full-rate ANSI T1.413 Issue 2
ITU-T G.992.1 (G.dmt)
ITU-T G.992.2 (G.lite)
ITU-T G.994.1 (G.hs)
ITU-T G.992.3 (G.dmt.bis)
ITU-T G.992.5
Max 6 kilometers
Data Rates
Downstream: Up to 24Mbps
Upstream: Up to 3.5Mbps (With Annex M enabled)
ATM Features
UNI 3.1,ATM Adaptation Layer Type 5-AAL5
Multiprotocol encapsulation over ATM (RFC 1483)
UBR, CBR, VBR-rt, VBR-nrt
Supports 8PVCs
PPP Features
PPP over ATM (RFC 2364)
PPP over Ethernet (RFC 2516)
Switching Features
IEEE 802.1d transparent learning bridging
Routing Features
Classical IP and ARP over ATM (RFC 1577/2225), MER
Static routing, IP, TCP, UDP, ARP
NAT, NAPT, DNS, DDNS, DHCP Server
UPnP, Virtual Server, DMZ, Port Trigger
Security
NAT
IP filterling
MAC filtering
Parental control
VPN Pass Through
IPSec/PPTP/L2TP Pass-through
QoS
IP Type of service(ToS)
802.1p
Device Management
HTTP, TELNET, Console
Administration and operation software (firmware) upgradable locally by web(HTTP), console(TFTP)
SNMP

Hardware Specification
Ports
1 10/100M LAN Port(RJ45)
1 Line Port(RJ11)
1 USB 1.1 port
LED Indicators
USB, LAN, ADSL, Alarm, ACT, Power
Dimensions (W*D*H)
6.5*4.3*1.1 in.(165*108*28 mm)
Environment
Operating Temperature: 0℃~40℃ (32℉~104℉)
Storage Temperature: -40℃~70℃ (-40℉~158℉)
Operating Humidity: 10%~90% non-condensing
Storage Humidity: 5%~90% non-condensing

Source: TP-Link.com

TP-Link TD-8817

ADSL2/2+ Ethernet/USB Modem Router

Description:

The TP-Link ADSL2+ Modem Router (TD-8817) is a 2-in-1 device that combines the functions of a DSL modem and 1-port 10/100 Ethernet router. It also provides a USB interface through which you can connect to the router. It supports the latest ADSL2/2+ standards to provide higher performance (up to 24Mbps downstream) and longer reach from your Internet Service Provider? (ISP) Digital Subscriber Line Access Multiplexer (DSLAM). You can also create a wired network to share your high-speed Internet connection, documents, photos, music, videos, and printers.
The TD-8817 includes a built-in QoS engine that helps prioritize Internet traffic to enable smooth Internet phone calls (VoIP) and ag-free online gaming. In addition, this device includes Dual Active Firewalls (Packet filtering and NAT) to help protect your network from potential attacks from across the Internet.
Setting up the TD-8817 is simple since it automatically detects your DSL settings to quickly establish a connection to the Internet.
The TD-8817 also supports TR-069 which automatically updates the firmware and other settings when they become available from your ISP.
Featuring high ADSL performance, various QoS policy, easy-to-use, TD-8817 is your best choice to access to the internet.
The device comes with a CD with an Easy Setup Assistant that helps you step by step to configure your Internet connection. This feature allows even novice users to setup the router products without sacrificing any key features, just play the AUTO-RUN CD bundled to have your network set up quickly & hassle-free.

Features:
  • Access a high-speed DSL Internet connection
  • Up to 24Mbps downstream speed
  • Supports Annex M, which can double upstream data rates
  • Connect your computer using Ethernet or USB
  • QoS prioritization based on ToS, DSCP, service type or 802.1p
  • Triple Active Firewalls: SPI, NAT and Packet Filter
  • Supports DHCP, Universal Plug-and-Play (UPnP), and includes a user-friendly Setup Wizard which takes you through configuring your network, step by step
  • Administer and Upgrade the Router Remotely over the Internet

Software Specification
ADSL Features
Full-rate ANSI T1.413 Issue 2
ITU-T G.992.1 (G.dmt)
ITU-T G.992.2 (G.lite)
ITU-T G.994.1 (G.hs)
ITU-T G.992.3 (G.dmt.bis)
ITU-T G.992.5
Max 6 kilometers
Data Rates
Downstream: Up to 24Mbps
Upstream: Up to 3.5Mbps (With Annex M enabled)
ATM Features
UNI 3.1/4.0,ATM Adaptation Layer Type 5-AAL5
Multiprotocol encapsulation over ATM (RFC 1483)
UBR, CBR, VBR-rt, VBR-nrt
Supports 8PVCs
PPP Features
PPP over ATM (RFC 2364)
PPP over Ethernet (RFC 2516)
Switching Features
IGMP snooping
IGMP multicast
Port VLAN
Tag VLAN
IEEE 802.1d transparent learning bridging
Routing Features
Classical IP and ARP over ATM (RFC 1577/2225), MER, RIP V1/V2
Static routing, IP, TCP, UDP, ARP
NAT, NAPT, DNS, DDNS, DHCP Server
UPnP, Virtual Server, DMZ
SIP, H323 ALG
Security
Stateful Packet Inspection (SPI)
NAT
Packet Filter
VPN Pass Through
IPSec/PPTP/L2TP Pass-through
QoS
IP Type of service(ToS)
802.1p
Device Management
HTTP, TELNET, Console
Administration and operation software (firmware) upgradable locally by WEB, TFTP, FTP, Console
SNMP V1/V2
CWMP(TR-069)

Hardware Specification
Ports
1 10/100M LAN Ports(RJ45)
1 Line Port(RJ11)
1 USB 1.1 port
LED Indicators
USB, LAN, ADSL, ACT, Power
Dimensions (W*D*H)
6.5*4.3*1.1 in.(165*108*28 mm)
Environment
Operating Temperature: 0?~40? (32?~104?)
Storage Temperature: -40?~70? (-40?~158?)
Operating Humidity: 10%~90% non-condensing
Storage Humidity: 5%~90% non-condensing

Source: TP-Link.com
Related Posts Plugin for WordPress, Blogger...